How can I make my own wall-trons with LED apron GFX?

[rysieboy10]

Hey guys can anybody help me? I have looked at graphics packs on youtube for some superstars. But how do I add LED graphics to the wall-tron videos? Thanks in advance!

[ItzTheRampage]

The green marked Part is the Head Tron on the Stage aswell as the LED Board on the ring

[Paroxysm]

The green marked Part is the Head Tron on the Stage aswell as the LED Board on the ring

I'm pretty sure that doesn't answer his question, it looks like he is new to it and wants to now how to inject custom GFX.

[rysieboy10]

The green marked Part is the Head Tron on the Stage aswell as the LED Board on the ring

I'm pretty sure that doesn't answer his question, it looks like he is new to it and wants to now how to inject custom GFX.

No that's what I wanted but that looks different to where it is from the new days shown below. Which is in the correct position?

[Paroxysm]

The green marked Part is the Head Tron on the Stage aswell as the LED Board on the ring

I'm pretty sure that doesn't answer his question, it looks like he is new to it and wants to now how to inject custom GFX.

No that's what I wanted but that looks different to where it is from the new days shown below. Which is in the correct position?

What you marked in red right there is the same graphic that will show on the header and LED apron.

[rysieboy10]

Ok thanks bro! the dimensions is 512x512 isn't it?

[ItzTheRampage]

512x512 and 512 x 256 for minitrons

[rysieboy10]

Thanks a lot mate

[ObsoleteRipZz]

Getting the position right will be trial and error until you fully get used to it. Once you get into the swing of things you will start making custom ones more than likely lol it's fun but also a bit of a headache

[rysieboy10]

Would it work if l put the image as 512x512 marked each area and then place each part of the walltron over that area?

[ObsoleteRipZz]

Yeah it would that would actually make it a lot easier to keep the position for each walltron perfect. I didn't even think about making a template

[Cave Waverider]

Which program do you guys use to create the walltrons and move the parts around?

[rysieboy10]

Which program do you guys use to create the walltrons and move the parts around?

I download the graphics off youtube and I use Sony Vegas to edit, but you can use any video editing software if you convert the file to bk2 after. I uploaded the template for the walltrons here, i haven't tested it yet but it should work https://www.mediafire.com/?bv660bjmsj9cxxd 

Also love your data editor GREAT JOB!

Edited May 15, 2016 by rysieboy10

[rysieboy10]

One more thing can anyone help me use data editor to put new gfx on a team entrance?

[ObsoleteRipZz]

I use Sony Vegas as well. LOVE that program.

 

As far as Data Editor it works essentially the same as the moveset tab and entrances. You can choose any slot you want for Wall, Minis and Titantrons BUT the only difference is that you can't carry it over into universe. I personally started removing certain Mini's and Wall's of either duplicate guys or wrestlers I don't really plan to use so I would have everything set for The Dudleyz and NAO in Universe mode. I wish there was a way to import all exhibition teams into Universe

 

If you need a bit more explaining let me know I'm glad to help!

Edited May 15, 2016 by RipZz

[Cave Waverider]

As far as Data Editor it works essentially the same as the moveset tab and entrances. You can choose any slot you want for Wall, Minis and Titantrons BUT the only difference is that you can't carry it over into universe. I personally started removing certain Mini's and Wall's of either duplicate guys or wrestlers I don't really plan to use so I would have everything set for The Dudleyz and NAO in Universe mode. I wish there was a way to import all exhibition teams into Universe

Porting Exhibition teams to Universe teams and vice versa should be no problem with Data Editor & Custom Character Tools (it has worked well for me so far). You just have to load up the team, change the ID to that of a free universe slot and you'll be good. The Team IDs for MyWWE are 1-77 (1 being MyWWE Team 1, 77 being MyWWE Team 77 - not sure if 78-100 work as well they might work as hidden teams, haven't tested), the team IDs for Universe are 101-200 (101 being Universe Team 1, 177 being Universe Team 177 - not sure if 178-200 work as well they might work as hidden teams, haven't tested). Once you changed the ID, make any other changes you wish (you can set the same titantrons, walltrons and minitrons for you used for Exhibition in Universe), then click the "Install .team_info via CCT" button to install the team via Custom Character Tools.

So, let's say you wish team 23 to be the same in MyWWE and Universe. First you set the id to 23 in the Data Editor, then click "Install .team_info via CCT". This will install the team in team slot #23 for MyWWE. Second you keep the same data and somply set the id to 123 in the Data Editor, then click "Install .team_info via CCT". This will install the same team in team slot #23 for Universe mode. Of course, you can pick any ID you want. Also, this should allow you to add the same wrestler to multiple teams in Universe Mode like you can in MyWWE (although this might lead to issues with feuds, etc., but I haven't tested this).

Doesn't this for you? What are the exact issues you're experiencing?

Edited May 15, 2016 by Cave Waverider

[rysieboy10]

I use Sony Vegas as well. LOVE that program.

 

As far as Data Editor it works essentially the same as the moveset tab and entrances. You can choose any slot you want for Wall, Minis and Titantrons BUT the only difference is that you can't carry it over into universe. I personally started removing certain Mini's and Wall's of either duplicate guys or wrestlers I don't really plan to use so I would have everything set for The Dudleyz and NAO in Universe mode. I wish there was a way to import all exhibition teams into Universe

 

If you need a bit more explaining let me know I'm glad to help!

As far as Data Editor it works essentially the same as the moveset tab and entrances. You can choose any slot you want for Wall, Minis and Titantrons BUT the only difference is that you can't carry it over into universe. I personally started removing certain Mini's and Wall's of either duplicate guys or wrestlers I don't really plan to use so I would have everything set for The Dudleyz and NAO in Universe mode. I wish there was a way to import all exhibition teams into Universe

Porting Exhibition teams to Universe teams and vice versa should be no problem with Data Editor & Custom Character Tools (it has worked well for me so far). You just have to load up the team, change the ID to that of a free universe slot and you'll be good. The Team IDs for MyWWE are 1-77 (1 being MyWWE Team 1, 77 being MyWWE Team 77 - not sure if 78-100 work as well they might work as hidden teams, haven't tested), the team IDs for Universe are 101-200 (101 being Universe Team 1, 177 being Universe Team 177 - not sure if 178-200 work as well they might work as hidden teams, haven't tested). Once you changed the ID, make any other changes you wish (you can set the same titantrons, walltrons and minitrons for you used for Exhibition in Universe), then click the "Install .team_info via CCT" button to install the team via Custom Character Tools.

So, let's say you wish team 23 to be the same in MyWWE and Universe. First you set the id to 23 in the Data Editor, then click "Install .team_info via CCT". This will install the team in team slot #23 for MyWWE. Second you keep the same data and somply set the id to 123 in the Data Editor, then click "Install .team_info via CCT". This will install the same team in team slot #23 for Universe mode. Of course, you can pick any ID you want. Also, this should allow you to add the same wrestler to multiple teams in Universe Mode like you can in MyWWE (although this might lead to issues with feuds, etc., but I haven't tested this).

Doesn't this for you? What are the exact issues you're experiencing?

Thanks for all of your help!  if I have any issues ill be sure to get back to you