Jump to content
 

Triple H pac revamped with new attire!


summerslammer

Recommended Posts

Thanks, fellas... Hey, Bugsy and Red, Im probably gonna post most pic previews here instead of the pm... Ill just give you guys a shout out when I have an update and post them here... I dont want to overload your guys' inboxes... 

PS: 2 New updates in the first post. Bash at the Beach 1994 re-visited and Bugsyboys Wrestling Challenge ramp conversion....

  • Like 3
Link to comment
Share on other sites

A small update to Clash of the Champions XXV. I added some flags hanging from the ceiling by the ring and a steel barricade around the ring. I will have more previews over the weekend. @jbl328, all Clash of the Champions pics are updated as well with the Legends icon. If you want to add them to the blog, they are there. Its up to you. 

Edited by summerslammer
  • Like 1
Link to comment
Share on other sites

Ok.. i got ya.. You see that 20 9A to right of what you have highlighted? that is your arena size... take note of it... open up your plist360.arc file... find STG 0028 towards the top... when you find that, you will see i think 6 sets of zeros (00 00 00 00 00 00) then after those you will see 4 characters right before FF FF... those four characters are the arena size for that stage.. the FF FF is the end of that arena and then the STG is for the next arena and so on... to change your arena size, go to those four characters and just type over them the arena size that you noted earlier. but this time you will reverse it. So, 20 9A will reverse to 9A 20 in the plist360.arc file... and thats it. save your arc file and inject it and your bg28.pac file back to your JTAG...

Another way to do this is open up XPacker and open your bg28.file (ctrl-x) and your arena size will appear and in XPacker your arena size will be reversed to the correct way you will type it in hex... So, you will see 9A 20 in XPacker, not 20 9A... it makes it easier i think.. 

Did any of this make sense? if you have any more questions, just holler...

Link to comment
Share on other sites

Ok.. i got ya.. You see that 20 9A to right of what you have highlighted? that is your arena size... take note of it... open up your plist360.arc file... find STG 0028 towards the top... when you find that, you will see i think 6 sets of zeros (00 00 00 00 00 00) then after those you will see 4 characters right before FF FF... those four characters are the arena size for that stage.. the FF FF is the end of that arena and then the STG is for the next arena and so on... to change your arena size, go to those four characters and just type over them the arena size that you noted earlier. but this time you will reverse it. So, 20 9A will reverse to 9A 20 in the plist360.arc file... and thats it. save your arc file and inject it and your bg28.pac file back to your JTAG...

Another way to do this is open up XPacker and open your bg28.file (ctrl-x) and your arena size will appear and in XPacker your arena size will be reversed to the correct way you will type it in hex... So, you will see 9A 20 in XPacker, not 20 9A... it makes it easier i think.. 

Did any of this make sense? if you have any more questions, just holler...

Screenshot%202.png

So this Right now ? I save it with it will probably be a bit better to  get x packer  it probably be easy on me         

 

Link to comment
Share on other sites

A small update to Clash of the Champions XXV. I added some flags hanging from the ceiling by the ring and a steel barricade around the ring. I will have more previews over the weekend. @jbl328, all Clash of the Champions pics are updated as well with the Legends icon. If you want to add them to the blog, they are there. Its up to you. 

Ok man. Thanks for the update. I will do that later

Link to comment
Share on other sites

Ok.. i got ya.. You see that 20 9A to right of what you have highlighted? that is your arena size... take note of it... open up your plist360.arc file... find STG 0028 towards the top... when you find that, you will see i think 6 sets of zeros (00 00 00 00 00 00) then after those you will see 4 characters right before FF FF... those four characters are the arena size for that stage.. the FF FF is the end of that arena and then the STG is for the next arena and so on... to change your arena size, go to those four characters and just type over them the arena size that you noted earlier. but this time you will reverse it. So, 20 9A will reverse to 9A 20 in the plist360.arc file... and thats it. save your arc file and inject it and your bg28.pac file back to your JTAG...

Another way to do this is open up XPacker and open your bg28.file (ctrl-x) and your arena size will appear and in XPacker your arena size will be reversed to the correct way you will type it in hex... So, you will see 9A 20 in XPacker, not 20 9A... it makes it easier i think.. 

Did any of this make sense? if you have any more questions, just holler...

Screenshot%202.png

So this Right now ? I save it with it will probably be a bit better to  get x packer  it probably be easy on me         

 

 

You don't have Xpacker? Ok, well... Here, follow this... That file above is still the bg28.pac you have open in your hex workshop. We only open that bg28.pac in your hex workshop to find the arena size. In that file we leave the arena size as it was... So, it needs reversed back to 20 9A. So, reverse back to 20 9A and leave that file alone.  We don't need to make any changes to that file. You need your plist360.arc file. Find it and open it in your hex workshop. I use HxD as my hex editor but its the same concept. Look at the following pic

photo Untitled_zpssphuuiur.png

That is the file you want to edit in hex. Scroll down from the top. All the arenas are towards the top of this file. Find 0028. Once you do that, you will see 6 sets of zeros, 00 00 00 00 00 00. Right after those, you will see 4 characters followed by FF FF. The 4 characters are the arena size. Thats what in red in the pic I shared with you, the arena size. As you can tell, I reversed it. Now it says 9A 20 instead of 20 9A. Its simple when you get the hang of it.. Keep trying you will get it. And yes, XPacker makes ALL OF THIS EASIER!!! Well worth the money!

Edited by summerslammer
Link to comment
Share on other sites

Ok.. i got ya.. You see that 20 9A to right of what you have highlighted? that is your arena size... take note of it... open up your plist360.arc file... find STG 0028 towards the top... when you find that, you will see i think 6 sets of zeros (00 00 00 00 00 00) then after those you will see 4 characters right before FF FF... those four characters are the arena size for that stage.. the FF FF is the end of that arena and then the STG is for the next arena and so on... to change your arena size, go to those four characters and just type over them the arena size that you noted earlier. but this time you will reverse it. So, 20 9A will reverse to 9A 20 in the plist360.arc file... and thats it. save your arc file and inject it and your bg28.pac file back to your JTAG...

Another way to do this is open up XPacker and open your bg28.file (ctrl-x) and your arena size will appear and in XPacker your arena size will be reversed to the correct way you will type it in hex... So, you will see 9A 20 in XPacker, not 20 9A... it makes it easier i think.. 

Did any of this make sense? if you have any more questions, just holler...

Screenshot%202.png

So this Right now ? I save it with it will probably be a bit better to  get x packer  it probably be easy on me         

 

 

You don't have Xpacker? Ok, well... Here, follow this... That file above is still the bg28.pac you have open in your hex workshop. We only open that bg28.pac in your hex workshop to find the arena size. In that file we leave the arena size as it was... So, it needs reversed back to 20 9A. So, reverse back to 20 9A and leave that file alone.  We don't need to make any changes to that file. You need your plist360.arc file. Find it and open it in your hex workshop. I use HxD as my hex editor but its the same concept. Look at the following pic

Hidden Content

That is the file you want to edit in hex. Scroll down from the top. All the arenas are towards the top of this file. Find 0028. Once you do that, you will see 6 sets of zeros, 00 00 00 00 00 00. Right after those, you will see 4 characters followed by FF FF. The 4 characters are the arena size. Thats what in red in the pic I shared with you, the arena size. As you can tell, I reversed it. Now it says 9A 20 instead of 20 9A. Its simple when you get the hang of it.. Keep trying you will get it. And yes, XPacker makes ALL OF THIS EASIER!!! Well worth the money!

oh I  get what your saying will get x packer  as soon I get my  Xbox. is possible  to take arenas from wwe 13 like king of the ring 98 I wanna change from wwe to wwf? 

Link to comment
Share on other sites

it good to know I wanna make a pack   that contain wwe 13 Attitude Era arenas but with WWF. logos  this pack be a add on to wrestling legends you can sort called it DLC.  there some great arenas in wwe 13 like rumble 98 and 99. also any other arenas that from wwe 2k16 like backlash 2001, or survivor series   2000.      

  • Like 1
Link to comment
Share on other sites

Wrestlemania IV and V (Wrestling Legends only) preview up...

man the wrestlemania look awesome do you plan to do other wrestlemania like wrestlemania 11 or wrestlemania 18 I figure I would ask?

Yeah... we are gonna have 2 Wrestlemania slots in the Legends game. One with a ramp, and one without... You can just change them out as you feel... I will try and get all the classic WMs covered first 1-15 or 20 by launch, then can just update in my spare time... But yeah, I "plan" on doing all 32... down the line that is...lol

  • Like 2
Link to comment
Share on other sites

Wrestlemania IV and V (Wrestling Legends only) preview up...

man the wrestlemania look awesome do you plan to do other wrestlemania like wrestlemania 11 or wrestlemania 18 I figure I would ask?

Yeah... we are gonna have 2 Wrestlemania slots in the Legends game. One with a ramp, and one without... You can just change them out as you feel... I will try and get all the classic WMs covered first 1-15 or 20 by launch, then can just update in my spare time... But yeah, I "plan" on doing all 32... down the line that is...lol

WOW man  love your wwf  wrestlemania version  all the ads and stuff . it bring back me memory  as a child :'( thank you  at the age 27 I never thought in million years a wrestling game have all the stuff I wanted           

Link to comment
Share on other sites

Damn, those arenas look fabulous. Love all the careful details you put into the crowd, around the arena, entrance etc. Wrestlemanias 1 - 16 are my personal favorites even though 16 was the 1st one I was really disappointed with(ie The Rock should've won!!!)

Link to comment
Share on other sites

Re-vamped Wrestlemania III arena in first post... This time I actually watched some of the PPV on WWE Network instead of shitty pics online. I tried to get it as close as possible to the real thing. I hope you all dig it....

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.