No Bounce Code Help

[TitaniumCodeMaster]

First off this topic is not a code request of any kind; I am simply asking for a little help here.

OK what I have managed to do is put togather some scraps of wich are the No Bounce code for this game. I matched the address and values from SD5 and serched for them in SD6 on the PS2DIS, they are close to the area But I have them.

The codes are encrypted in the old Codebreaker2 Format.. Here they are

Codebreaker2 : 2A0B3EAA 27BDFFE0

2AB73EB6 24020001

Now please trust me when I say this. I have spent at least 2 hours trying to find the correct Values to use with the Addresses and this is by far the best I have found. The problem is that the Game FREEZES at the Screen where you Pick Exhibision, Create Mode, PPV, Options, Season mode, ETC. I have tried the old (03E00008) Value on the first line and depending on what the value is on the scecond code 00000000 00000001 the game will do the same as I just Explained FREEZE!!!

I have tried two different Master codes also. Dacrone's Code FA7A7C13 320471E0.

Trigins Code: F0138508 0013850B. Sorry If I messed up on the credit for the M code....

I think the codes are correct I am not positive on that. From what I have seen I think the code could work, but with a little help from a Joker Code, someone could try to make one to enable this code in a Hell In The Cell match because that is what the code orginaly was for. It is labled as HicDrop__FP5CChar on the PS2DIS program Under SD5. Here is the original CODES in HEX Format 001E55C0 27BDFFE0 it will show the code but insted of showing the Addiu command it will show Beq. But if you look carfully at the code you will see this: $001E6904. NOW.. select edit and Jump to Address. type in the $001E6904 and press enter. then it shows you LI, wich this is the second line of the code. Now in order to find the Addiu code you will notice an Abrev 2 code lines down wich will say 001E6900 8F83C2C0 JAL. This is where you also select Jump to Address and type in 001E550C and press enter and their we have the first line of our code 001E55C0. I am almost 100% shure this is the correct codes for the No Bounce code.

Something I just rememberd, when you put in the Hex code to jump to Address when it finds the code Press Space Bar on the Keybord to mark the code then press F3 to show the regular Code list. Sorry about that

Anyway thank you for taking the time to read this post, and to get to the point If someone out their knows how to make this baby work, please help me!!!. Thank you

TitaniumCodeMaster

[TitaniumCodeMaster]

Well I found a better set off codes this time, but you can choose your Wrestlers and the game loads fin, but when you start the match the next loading screen never appers. If anyone is interested here are the new codes.

CodeBreaker2

2A0B3EAA 03E00008 - 2AC73EAA 000000001

This is the closest I've came since yesterday so just remeber I not shure if the codes work because I can't make it to the Match:) LOL

[Trigin]

Try this:

Hex (NTSC)

202E3910 03E00008

202E3914 00000000

What causes a character to bounce in this game, though? The only high up area I've noticed so far is the truck in the Parking Lot Brawl, & you land on your feet if you walk off of it. (I'm just curious as to what a no bounce code would serve, since Yuke's took out all of the really high up areas.)

Edited December 21, 2004 by Trigin

[talksick]

does this code work for doing moves off the cell? do they work for CB2 v.8?

[TitaniumCodeMaster]

Well The first thing I would like to say is: Thank you Trigin for the codes because they do work. I havent got a chance to look to see where you found the Addresses from on the PS2DIS but I would like to say that since you found the Correct Address to use and the Codes do work, then you deserve full credit for finding this code. I just wish I could have been the guy to find it anyway here is the Codes and a Full discription on what the codes are used for.

Code Breaker v.1-6.

202E3910 03E00008

202E3914 00000000

Credit: Trigin

Basicly the only REAL use for this code is a Hell In The Cell Match because it is the only remianing High spot in the Game!! Climb the HIAC and do a running move like a Clothsline or Drop kick or my favorit a Rolling Drop kick but make shure you are doing it as if you were taking a leap of faith off the Cell, When you do insted of bouncing like a Ball when you hit the floor and causing majior ammounts of damage to yourself you will land on your FEET unharmed without causing any damage to you!!!! how amazing is that Just imagine all the possibilities with this. you can even to moves off the cell to your opponent. Imagine doing Kevin Nashes Jacknife powerbomb to your opponent off the cell and they dont bounce!!! it makes this game alot more interesting and more fun since their is no Times Square. This code works for every body in the game including the Ref and Computer. I would recomind this code in season modes to help you win matches or even better use it in a 6 man HIAC match.

Anyway Thank you once agian Trigin for the code and Happy playing everyone:)

TitaniumCodeMaster

[talksick]

you wouldn't happen to know where I might find a version of this code for CB2 version 8.0.

[TitaniumCodeMaster]

Sorry man, at the present time nobody knows or has found the Hexoffsets to encrypt it to V.8, I not shure if the coding is the same or not. I normaly use Kadavaitor's Code Thingy to Incrypt and Decrypt my codes, but it dosent support anything higher than V.7 and V.8 and Gameshark is the sameway to so ustill someone finds out how to encrypt them to this new code format I would recomend finding an older version of Code Breaker, at least for this game and SD5 and SD4.

TitaniumCodeMaster

[Trigin]

To use SvR Hex codes on a CodeBreaker 2 version 7 & above:

1. Create a new file directory. Name it "SvR," "SmackDown! Vs. RAW," etc.; name it whatever you want.

2. Now, in the named file directory, create your first code. Name it "(M) Code," "(M)asterCode," "Enable Code," etc.; again, name it whatever you want.

3. Now, in the named code, enter the code: F0100008 0013850B.

4. Next, in the SvR file directory again, create as many & enter as many Hex codes as you want underneath the (M) Code. Just DON'T mix any CB2v7 & up encrypted codes with the Hex codes, or the game will never load.

[TitaniumCodeMaster]

So basicly from What you are saying is this game only reconizes Hex coding insted of the codes being Encrypted under CB2 format??

[Trigin]

No, you just can't use CB2v7 & up encrypted codes along with Hex codes. I bought a CB2v8.1 a while ago & found out the hard way that this won't work (unless you like to stare a blank screens).

You are however able to use CB2v1 - v6 encrypted codes along with Hex codes, if you use F0100008 0013850B or FA7A006E 32C40D9D as the (M) Code.

[Dacrone]

thanx for the info trig, i just got a v8.1 for xmas (along w/a keyboard )