Problem with turnbuckle and cornerposts after installing arena mods

[nWo_Member]

Hi guys!

I have installed the hidden arena pack and some arena mods.

The installed arenas are:

• Dynamite by Titavius
• Smackdown by Titavius
• WCW Monday Nitro Club La Vela by B4G.TV
• All Out by 2kLive_
• Rampage by 2kLive_

My problem relates to the turnbuckles and the cornerposts. In the Dynamite, Rampage and All Out arena it happens again and again that the default turnbuckles and cornerposts are shown and not the modded ones. Also, the texture on the turnbuckles is distorted. Once it happened that the modded cornerposts were shown in the NXT arena.  I hope I could explain it more or less clearly.

Has anyone ever had a similar problem? Is there maybe a solution for it?

Thanks in advance!

[BlackBen83]

@nWo_Member You just need to edit your misc4_arena file.

for example, if you copied and pasted the AEW one into your main file, and then installed the Smackdown one, the SD one replaced the AEW one.

So you need to enter all the data for these arenas manually with WrestleMINUS.

[nWo_Member]

Thanks for the answer @BlackBen83

I have edited the misc4_arena file every time i added a new arena. The problem is only related to the cornerposts and turnbuckles, the rest of the arena (Dynamite, SD, All Out etc.) is there as intended.

[BlackBen83]

26 minutes ago, nWo_Member said:

Thanks for the answer @BlackBen83

I have edited the misc4_arena file every time i added a new arena. The problem is only related to the cornerposts and turnbuckles, the rest of the arena (Dynamite, SD, All Out etc.) is there as intended.

Have you ever tried to edit the number of arturnbuckles or corner and enter them in the misc04?

For example used a different number than the ones in the game files? Because some of them may have the same number:
- arturnbuckles00023_AEW Dark
- arturnbuckles00023_AEW All Out

Same for the cornerpost, just see in the "arena" folder in the main game folder? I had the same problem with some arenapron(s) number for Stardom arena for example. I have just changed the number, and edited my misc04, and it's done.

Ben

Edited November 17, 2021 by BlackBen83

[nWo_Member]

15 minutes ago, BlackBen83 said:

Have you ever tried to edit the number of arturnbuckles or corner and enter them in the misc04?

For example used a different number than the ones in the game files? Because some of them may have the same number:
- arturnbuckles00023_AEW Dark
- arturnbuckles00023_AEW All Out

Same for the cornerpost, just see in the "arena" folder in the main game folder?

Ben

I will try that but for some arenas it is not possible to change the number in hex, they are in HSPC format.

[BlackBen83]

3 minutes ago, nWo_Member said:

I will try that but for some arenas it is not possible to change the number in hex, they are in HSPC format.

I am in the process of reinstalling everything on my side, following a burn out of my pc a month ago.

I will install the AEW arenas to see as well. I'll let you know if I encounter the same problems as you.

[nWo_Member]

@BlackBen83thanks a lot bro!

[nWo_Member]

After further testing I can say: it has something to do with the NXT arena.

If I start a match in an AEW arena first, everything is fine. If I then start a match in the NXT arena ther are the wrong turnbuckles and cornerposts (those from the AEW arena) and the NXT logo is distorted.

And it happens vice versa.

[BlackBen83]

2 minutes ago, nWo_Member said:

After further testing I can say: it has something to do with the NXT arena.

If I start a match in an AEW arena first, everything is fine. If I then start a match in the NXT arena ther are the wrong turnbuckles and cornerposts (those from the AEW arena) and the NXT logo is distorted.

And it happens vice versa.

You have an NXT modded arena? or perhaps that the two lines have been reversed when entering each misc01?
- AEW replace 205 Live : line 3 (SelectNum : 3)
- NXT is on line 2 (SelectNum : 2)

[nWo_Member]

No the NXT arena is the original one.

[BlackBen83]

14 minutes ago, nWo_Member said:

No the NXT arena is the original one.

Ok I have the original one too. I'll try this evening the AEW (205 Live) installation updated by Titavius. I'll let you feedback.

[mattfick]

the game only loads one set of CM's per session

[nWo_Member]

1 minute ago, mattfick said:

the game only loads one set of CM's per session

Is there a way to solve this? For better understanding: So the objects (turnbuckle, ringpost etc) are in the cm files?

[mattfick]

in your misc04, do you have the ropecm, bucklecm and cornerpostcm assigned to 2?

[nWo_Member]

Yes I think so.

[mattfick]

ok, well when you start your game, go straight to an aew arena and see if its correct

[nWo_Member]

Yes, if I select an AEW arena first everything is fine. But is there a way to have both AEW and NXT buckles and cornerposts? Because I have both shows in universe mode...

[mattfick]

no. there is no way, the game only loads one style of models per session

[nWo_Member]

Oh, too bad. Anyways, thank you for your help. Is it possible that any other objects could be affected in the same way?

[BlackBen83]

7 hours ago, nWo_Member said:

Oh, too bad. Anyways, thank you for your help. Is it possible that any other objects could be affected in the same way?

Hi, just for information, I reinstalled AEW Dynamite (updated 3 on PWM), and everything works fine on my side. I just had a problem with the cornerpost of the NXT curiously, but I quickly fixed the problem by copying and pasting the original file saved from the NXT in the ingame folder.

Just edited the misc files (1 and 4) and all works.

EDIT : But I don't use the "prop" files that you find in the download, since I edit it myself. Just like the "root".

Edited November 18, 2021 by BlackBen83

[nWo_Member]

@BlackBen83 thanks a lot for the help.

Just curious: Which NXT files did you copy and past? Doesn't that overwrite the dynamite files?

Edited November 18, 2021 by nWo_Member

[BlackBen83]

1 hour ago, nWo_Member said:

@BlackBen83 thanks a lot for the help.

Just curious: Which NXT files did you copy and past? Doesn't that overwrite the dynamite files?

In the Arena folder of the game. I just replaced the "arcornerpost00002" file (copy and paste), rehash resign with CCT and everything was ok.

No it doesn't, the AEW file is named "arcornerpostcm00002"

 

Edited November 18, 2021 by BlackBen83

[nWo_Member]

Unfortunately it did not work for me. It's like mattfick sayed, the game does not load two cm files in one session, at least in my case... 😩

[mattfick]

3 hours ago, nWo_Member said:

Unfortunately it did not work for me. It's like mattfick sayed, the game does not load two cm files in one session, at least in my case... 😩

no, the game only loads one set of cms per session