Please Help with Hulk Hogan Mod

[erodr133]

Hi everyone,

I recently bought WWE 2k19 on PC after a terrible experience with WWE 2k20. I mainly bought it because 2k19 has a much better roster of classic wrestlers and better modding capablities for the wrestlers I wanted to input. I downloaded CCT and have tried to mod in Matt2282p's Hulk Hogan file with no luck. I've installed all the mods (at least it says I have) that CCT suggests you install. I've right clicked on Hogans slot (272, 475) in CCT and input his attire pac, started up the game and installed a Hogan pofo and moveset but he does not appear. Can anybody point out what I'm doing wrong? I watched this video and did everything exactly as the op did it without success. I didn't want to post on here and embarress myself, but I've tried for 10 hours over the last 2 days to correctly install a mod with no luck and I've run out of options. I've  Any help or insight would be so appreciated.

[noobmodder]

For the game it's only important that the file (the extension) is the right one and what's written within the file.

If the files say ch47502 and 47504 (Sidenote: 02 stands for in ring attire slot and 04 for the entrance attire, if you just have a char with 02 it uses that attire also for the entrance.

But that file name is more important for the user, as orientation because the game only cares if the "code" inside is correct.

So what you need to do is to open the files with a Hex Editor (HxD suggested). You will see that on the right side/field the file  EPK8.

Scroll down and you should see some lines with EMD and some numbers, like 00018002 (Just an example!! It can be different!!) change that to 00047502 (best way is to mark the numbers you need to change and then type the number that should be there instead. Example: Mark the 1 and then type 4)

You need to the same for the file with 04 at the end and, change it to 00047504

Don't forget to save the files!

If those numbers are already correct, then don't change them!!

What I also suggest is to clear the Chunk0.arc with the CCT and also regenerate the Chunk0.def then run the game.

Insert povo and moveset, while the game is running. Easiest way to do so is to go to "My WWE" and select a wrestler and select the save option there.

Now set up a match and see if Hogan appears.

If he still doesn't appear, then I sadly don't kniw what  the problem is.

[erodr133]

Okay. I was able to make some progress. Although Hogan now appears as this on the menu (Attire is correct). I'm unable to change it to read Hulk Hogan, however. Do you know what causing this problem?

 

[erodr133]

2 hours ago, noobmodder said:

For the game it's only important that the file (the extension) is the right one and what's written within the file.

If the files say ch47502 and 47504 (Sidenote: 02 stands for in ring attire slot and 04 for the entrance attire, if you just have a char with 02 it uses that attire also for the entrance.

But that file name is more important for the user, as orientation because the game only cares if the "code" inside is correct.

So what you need to do is to open the files with a Hex Editor (HxD suggested). You will see that on the right side/field the file  EPK8.

Scroll down and you should see some lines with EMD and some numbers, like 00018002 (Just an example!! It can be different!!) change that to 00047502 (best way is to mark the numbers you need to change and then type the number that should be there instead. Example: Mark the 1 and then type 4)

You need to the same for the file with 04 at the end and, change it to 00047504

Don't forget to save the files!

If those numbers are already correct, then don't change them!!

What I also suggest is to clear the Chunk0.arc with the CCT and also regenerate the Chunk0.def then run the game.

Insert povo and moveset, while the game is running. Easiest way to do so is to go to "My WWE" and select a wrestler and select the save option there.

Now set up a match and see if Hogan appears.

If he still doesn't appear, then I sadly don't kniw what  the problem is.

these are screenshots of the pofo and moveset files on data editor. I'm not sure what went wrong.

[Cave Waverider]

The name String settings in your .pofo likely aren't set correctly. Check out the Data Editor Tutorials on how to do that.
Alternatively, you can also try to the Hulk Hogan .pofo and .moveset from this link (ensure to edit the entrance parameters to your liking and according to which entrance files you've installed) and see if that works for you.

If that doesn't do it and you're playing the game in a different language, you could also try changing the game language to English and see if that helps. Perhaps the SuperString hasn't been fully updated for your language yet.

If that still doesn't work properly, retrace your steps by following the Installing Mods Wiki page and other Wiki pages as they are usually more thorough and explain steps in detail that videos sometimes forget to mention.

PS.: Your post title has been edited to better explain what you're seeking help with.

[noobmodder]

2 hours ago, Cave Waverider said:

The name String settings in your .pofo likely aren't set correctly. Check out the Data Editor Tutorials on how to do that.
Alternatively, you can also try to the Hulk Hogan .pofo and .moveset from this link (ensure to edit the entrance parameters to your liking and to which entrance files you've installed) and see if that works for you.

If that doesn't do it and you're playing the game in a different language, you could also try changing the game language to English and see if that helps. Perhaps the SuperString hasn't been fully updated for your language yet.

If that still doesn't work properly, retrace your steps by following the Installing Mods Wiki page and other Wiki pages as they are usually more thorough and explain steps in detail that videos sometimes forget to mention.

PS.: Your post title has been edited to better explain what you're seeking help with.

To give my 2 cents based on your input: I use the german language version of the game. Using the Super String worked for me. I didn't have to do much editing beside inserting the correct character ID in the character file, with a Hex Editor (as mentioned above)

[Stinger1717]

Can anyone help me out with the Hogan mod  as well please? I was able to import Hogan and his move set but I am not able to bring in his entrance. Can someone please explain to me how to import his entrance? I’ve been trying for a while but no luck. Thanks