Inject Custom Opening Show video on Generic Trons possible?

[BlackBen83]

Hi,

My question is simple (or not)

I just want to know where the generic trons are in game? It's possible to inject .bk2 files on them with an Editor? (especially to create an opening custom show video, like ROH for example).

I've three files (ROH, NJPW and RevPro) to inject.

Thanks for the help.

Ben

Edited April 4, 2019 by BlackBen83

[BlindedByTheGrace]

9 hours ago, BlackBen83 said:

Hi,

My question is simple (or not)

I just want to know where the generic trons are in game? It's possible to inject .bk2 files on them with an Editor? (especially to create an opening custom show video, like ROH for example).

I've three files (ROH, NJPW and RevPro) to inject.

Thanks for the help.

Ben

Hi, 

The intro videos for the shows in universe mode are located in the movies/ fullscreen folder. 

[BlackBen83]

10 hours ago, squaredcirclefan said:

Hi, 

The intro videos for the shows in universe mode are located in the movies/ fullscreen folder. 

@squaredcirclefan Thanks a million, I'll try this sunday evening

Have a nice day.

[BlackBen83]

@squaredcirclefan Hi, I have done my bk2 files, backup the "Intro Steel 1" for example and replace with my ROH intro opening. Renamed the "ROH" files intro_30008_0_0 ID, but in game Steel 1 is again normal.

What do I wrong?  

Thanks for your help in advance (and sorry to bother you again)

Have a nice day.

Ben

[Cave Waverider]

5 hours ago, BlackBen83 said:

@squaredcirclefan Hi, I have done my bk2 files, backup the "Intro Steel 1" for example and replace with my ROH intro opening. Renamed the "ROH" files intro_30008_0_0 ID, but in game Steel 1 is again normal.

What do I wrong?  

Thanks for your help in advance (and sorry to bother you again)

Have a nice day.

Ben

30008_0_0.bk2 doesn't look like Steel to me, it's white hearts on a pink background, so perhaps it's Candies or something?

[BlackBen83]

2 hours ago, Cave Waverider said:

30008_0_0.bk2 doesn't look like Steel to me, it's white hearts on a pink background, so perhaps it's Candies or something?

@Cave Waverider Oh yeah sorry, my bad, it's White Hearts on a pink background, yes, there're still in game too.

Edited April 11, 2019 by BlackBen83

[BlindedByTheGrace]

8 hours ago, BlackBen83 said:

@squaredcirclefan Hi, I have done my bk2 files, backup the "Intro Steel 1" for example and replace with my ROH intro opening. Renamed the "ROH" files intro_30008_0_0 ID, but in game Steel 1 is again normal.

What do I wrong?  

Thanks for your help in advance (and sorry to bother you again)

Have a nice day.

Ben

Hi,

The videos in the elements tab are not located in the movies/fullscreen section. They are located in one of the pac files in the MENU subfolder. 

When you select STEEL for instance, the video playing is not the one in that file. This is the reason why replacing an element wouldn't work. If you replaced one of the shows, it will work.

There is a better way. You can actually add your own shows to the SHOWLOAD menu without replacing, by adding data to the showloadtable.pac and showloadmenutable.pac files located in the pac/menu/createshow folder. All you then do is add the string name and custom ID for your videos. You can rename your videos with unused ID's  e.g intro_0056_0_0.bk2, which isn't used by any video in the game and point the string name to 56 in Hex.

Here is a short clip showcasing what I'm talking about :

I used one of the element videos which I just duplicated. For logo's to show up, the logotable.pac file in the same folder will need to be modified

Edited April 11, 2019 by squaredcirclefan

[BlackBen83]

42 minutes ago, squaredcirclefan said:

Hi,

The videos in the elements tab are not located in the movies/fullscreen section. They are located in one of the pac files in the MENU subfolder. 

When you select STEEL for instance, the video playing is not the one in that file. This is the reason why replacing an element wouldn't work. If you replaced one of the shows, it will work.

There is a better way. You can actually add your own shows to the SHOWLOAD menu without replacing, by adding data to the showloadtable.pac and showloadmenutable.pac files located in the pac/menu/createshow folder. All you then do is add the string name and custom ID for your videos. You can rename your videos with unused ID's  e.g intro_0056_0_0.bk2, which isn't used by any video in the game and point the string name to 56 in Hex.

Here is a short clip showcasing what I'm talking about :

I used one of the element videos which I just duplicated. For logo's to show up, the logotable.pac file in the same folder will need to be modified

Really useful Thanks @squaredcirclefan I'll try this tonight, and I'll tell you the results.

[BlackBen83]

Hi @squaredcirclefan,

So I've finally done three custom trons after injected my opening live theme on three original trons that I don't use in game (like Ravishing Rick Rude > RevPro), and I have created the RevPro UK video (Same way for ROH and NJPW).

It was the best and easiest way for me

Thanks for your advice.

[BlindedByTheGrace]

5 hours ago, BlackBen83 said:

Hi @squaredcirclefan,

So I've finally done three custom trons after injected my opening live theme on three original trons that I don't use in game (like Ravishing Rick Rude > RevPro), and I have created the RevPro UK video (Same way for ROH and NJPW).

It was the best and easiest way for me

Thanks for your advice.

Great. But out of curiouslity, how will you select the Rick Rude tron as an intro in Create A Show ? 

[BlackBen83]

12 minutes ago, squaredcirclefan said:

Great. But out of curiouslity, how will you select the Rick Rude tron as an intro in Create A Show ? 

@squaredcirclefan First, I opened CCT'19 and DataEditor'19. then I have loaded the original DataEditor "Rick Rude moveset" and installed the tron in parallel only by clicking install tron via CCT with the DataEditor button in the middle.

Once CCT is open, I go on Ravishing Rick Rude or Rick Rude, and I install the bk.2 only on the tron. I back up with CCT 😊

Run the game go on create a video and finally, add, for example, a titantron to the top layer of your video, select Rick Rude tron, and save.

Note : Once the new video is created, you can re-replace the original video of the tron or put it back in original without losing your new video ^^

Edited April 12, 2019 by BlackBen83

[BlindedByTheGrace]

5 minutes ago, BlackBen83 said:

@squaredcirclefan First, I opened CCT'19 and DataEditor'19. then I have loaded the original DataEditor "Rick Rude moveset" and installed the tron in parallel only by clicking install tron via CCT with the DataEditor button in the middle.

Once CCT is open, I go on Ravishing Rick Rude or Rick Rude, and I install the bk.2 only on the tron. I back up with CCT 😊

Run the game go on create a video and finally, add, for example, a titantron to the top layer of your video, select Rick Rude tron, and save.

Note : Once the new video is created, you can re-replace the original video of the tron or put it back in original without losing your new video ^^

Ok. So what you’re doing is using a recorded video from CAV as the intro clip? That’s another way too. 

The method I illustrated is to add the videos and logos so they are selectable in the menu like the In-game one’s. There is no tutorial on it atm so it’s tricky to do. 

If you want, I can send you my modified logotable files. If you send me a logo for each of the three events, I can place them in for you.

[BlackBen83]

4 hours ago, squaredcirclefan said:

Ok. So what you’re doing is using a recorded video from CAV as the intro clip? That’s another way too. 

The method I illustrated is to add the videos and logos so they are selectable in the menu like the In-game one’s. There is no tutorial on it atm so it’s tricky to do. 

If you want, I can send you my modified logotable files. If you send me a logo for each of the three events, I can place them in for you.

Oh thanks, what do you want as logos? my bk2 files could be good for you?

For the RevPro show I need to rework the titantron in HD ^^

Edited April 12, 2019 by BlackBen83

[BlindedByTheGrace]

30 minutes ago, BlackBen83 said:

Oh thanks, what do you want as logos? my bk2 files could be good for you?

For the RevPro show I need to rework the titantron in HD ^^

Logo's for the wrestling event. Images. A logo image for the actual wrestling event.

[noobmodder]

Hello! I have some questions

As I would like to add as much classic stuff as possible, I also like to add new Show Intros and Music.

Question:

1. Is that only possible by overwriting an existing Intro ?

2. I red several times that the new vidoe was "injected", So what is the correct file where I have to "Inject" the video I like to use?

3. What do I need to do that that videos show up in the menu also with correct description (Summer Slam 1990, for example) ?

Thanks in Advance for the answer

[BlindedByTheGrace]

27 minutes ago, noobmodder said:

Hello! I have some questions

As I would like to add as much classic stuff as possible, I also like to add new Show Intros and Music.

Question:

1. Is that only possible by overwriting an existing Intro ?

2. I red several times that the new vidoe was "injected", So what is the correct file where I have to "Inject" the video I like to use?

3. What do I need to do that that videos show up in the menu also with correct description (Summer Slam 1990, for example) ?

Thanks in Advance for the answer

Hi,

1. You can add show intros without overwriting an existing intro. You will just need to assign  a new ID to the intro. For instance, if you look in the movies/fullscreen folders, there are ID's which are skipped. For example intro_0060_0_0.bk2 isn't available. You can assign the ID's intro_0060_0_0.bk2 to intro_0070_0_0.bk2.

2. In this case, you are not injecting. Just change the filename for the intro video. The new ID is then added to the showloadtable.pac and showloadmenutable.pac files located in the pac/menu/showload folder.

3.You will have to do the above step. What you will be adding to the file is the ID for the intro video, the ID for the arena, the string name of the arena( from the string sheet) and the ID for the Show Logo

I will put up a tutorial on this within the week .

[noobmodder]

@squaredcirclefan Thank you very much. A tutorial would be great. Please step by step. And if possible with sources for the needed tools.

[BlindedByTheGrace]

On 5/26/2019 at 4:33 PM, noobmodder said:

@squaredcirclefan Thank you very much. A tutorial would be great. Please step by step. And if possible with sources for the needed tools.

Hi, I just want d to ask. Do you have a show intro video for Summerslam 1990 you want to use in your game.

[noobmodder]

@squaredcirclefan I indeed have a show intro of Summerslam 1990! :) also the theme, if you want. The intro is without audio, in case it would not work with such, AND in case a user wants to add different audio to the intro