Jump to content
 

Need Greg Valentine original files


drwho269

Recommended Posts

it appears that I deleted them by accident.

I believe they are:

CH24102

CH24104

I need them both.

Somehow I replace them with Damien Demento files.

Thank you.

Link to comment
Share on other sites

41 minutes ago, drwho269 said:

it appears that I deleted them by accident.

I believe they are:

CH24102

CH24104

I need them both.

Somehow I replace them with Damien Demento files.

Thank you.

Here are the files.

https://www.dropbox.com/s/k0r267fa8rcwz12/ch24104.pac?dl=0

https://www.dropbox.com/s/mjum2957nygttmz/ch24102.pac?dl=0

Edited by Dollarman
Link to comment
Share on other sites

Something is wrong....

I replaced the files with this files, also deleted Damien Demento, injected Valentine (to make sure) and it worked.... for 1 match.

Then I tried a second match and Kevin Sullivan comes down! WTF!

So I deleted Kevin Sullivan, injected again valentine and still Sullivan comes out! 

Yes I rebuild Def.

 

Link to comment
Share on other sites

29 minutes ago, drwho269 said:

Something is wrong....

I replaced the files with this files, also deleted Damien Demento, injected Valentine (to make sure) and it worked.... for 1 match.

Then I tried a second match and Kevin Sullivan comes down! WTF!

So I deleted Kevin Sullivan, injected again valentine and still Sullivan comes out! 

Yes I rebuild Def.

 

Hi, It seems you might have two sets of files with the same ID within one of the subfolders . Try searching within the wwe 2k18 folder for ch24102 and ch24104.

Link to comment
Share on other sites

Thank you, this fixed this issue.

(Kevin Sullivan was 241) 

Although it doesn't explain why Damien Demento doesn't work.

For what you said, does this means that the game looks for all subdirectories for the CH files?

Not just the Pac\CH directory?

Edited by drwho269
Link to comment
Share on other sites

1 hour ago, drwho269 said:

Thank you, this fixed this issue.

(Kevin Sullivan was 241) 

Although it doesn't explain why Damien Demento doesn't work.

For what you said, does this means that the game looks for all subdirectories for the CH files?

Not just the Pac\CH directory?

Yes. When you rebuild the chunk0.def, it creates a list of all the files in the pac folder and all its subfolders.

What id do you use for the Damien Demento ?

Link to comment
Share on other sites

3 minutes ago, drwho269 said:

635

What problems do you experience with the mod. Is it the character not loading when selected for a match ?

Link to comment
Share on other sites

Doesn't even appear on the list.

Before when I had him on the CH directory and installed the Pofo/Moveset he was not on the list.

But appeared when I choose Greg Valentine.

Then I removed him and then I had Kevin Sullivan instead.

Now Valentine and Sullivan are fine, but after I tried Damien Demento the game got screwed again. 

(now is fine, just not Damien Demento) 

I also have 2 The Warlord on my list.... although I only have one, the proper one loads, the other causes the game to crash.

I have no idea who is supposed to be there.

Link to comment
Share on other sites

With the two Warlords, I suspect the name string for Damien Demento in the pofo file may have been incorrect when installing and is installed as Warlord instead. Since there is only one Warlord mod, the game will crash when the second is selected . You can use CCT to uninstall both Warlord pofo files. Before uninstalling, first export both using CCT and check for the name string in data editor.

What has happened originally is both mods shared same ID with Valentines ( The Kevin Sullivan mod and Damien Demento mod). The Damien Demento mod overwrote the valentine one since it had the same filename. You will need to correct the namestring in the pofo file. I can do this for you if you have any difficulty.

Link to comment
Share on other sites

Sorry I was distracted in a 4 vs 4 elimination tag that lasted almost 50 minutes.

I check on your suggestion to use CCT to uninstalled The Warlord, problem is he is not on the CCT list. 

How else can I do it?

Link to comment
Share on other sites

Charlie Hass and Shelton Benjamin both load, but not together on the same match.

Still has two warlords. 

This warlord says is part of the team (hass & benjamin)???? 

If I use Mr Hughes I can't use Hayabusa.

edit: I deleted the teams of Hass & Benjamin and The Headbangers, but I still can't delete the 2nd warlord.

Or use hass & Benjamin together. (not even against each other) once I choose one the other is gray out.

Edited by drwho269
Link to comment
Share on other sites

4 hours ago, drwho269 said:

Charlie Hass and Shelton Benjamin both load, but not together on the same match.

Still has two warlords. 

This warlord says is part of the team (hass & benjamin)???? 

If I use Mr Hughes I can't use Hayabusa.

edit: I deleted the teams of Hass & Benjamin and The Headbangers, but I still can't delete the 2nd warlord.

Or use hass & Benjamin together. (not even against each other) once I choose one the other is gray out.

Hi, The reason is you have set the commentary name under Announcer settings for both characters to the same ID in Data editor. You will need to export the pofo and moveset for both characters into data editor, and change the commentary id for each to the character pac id. Reinject back into your game.

One other way of fixing the Warlord issue without deleting your save is to backup your pofo and moveset files using WWE 2k18 +. Look in the backup folder where all the pofo files are extracted and you will see the pofo files for all in-game characters and mods. if you scroll through, you will see the pofo file for the invalid warlord entry . You can note its ID, which you will need when uninstalling through CCT.

Link to comment
Share on other sites

@drwho269

Vanilla Game File

Here are the vanilla game files for each respective game: if you need another default character in the future.   

WWE 2K18 (PC): http://zipansion.com/LJf2
WWE 2K17 (PC): http://zipansion.com/JBAb
WWE 2K17 (XBOX 360): http://zipansion.com/JBW5
WWE 2K16 (PC): http://zipansion.com/JBZD
WWE 2K16 (XBOX 360): http://zipansion.com/JBix
WWE 2K15 (PC): http://zipansion.com/JBvX
WWE 2K15 (XBOX 360): http://zipansion.com/JBzZ
WWE 2K14 (XBOX 360): http://zipansion.com/JC3h
WWE 13 (XBOX 360): http://zipansion.com/JC6D
WWE 12 (XBOX 360): http://zipansion.com/JC9O
WWE SVR 2011 (XBOX 360): http://zipansion.com/JCEx
WWE Legends Of WM (XBOX 360): http://zipansion.com/JCK1
WWE SVR 2010 (XBOX 360): http://zipansion.com/JCLf
WWE SVR 2009 (XBOX 360): http://zipansion.com/JCPP
WWE SVR 2008 (XBOX 360): http://zipansion.com/JChz
WWE SVR 2007 (XBOX 360): http://zipansion.com/JCuh
WWE SVR 2006 (PS2): http://zipansion.com/JE8j
WWE SD! HCTP (PS2): http://zipansion.com/JEMA
TNA Impact (Models Only) (XBOX 360): http://zipansion.com/JDhA
Wrestle Kingdom (Model Only) (XBOX 360): http://zipansion.com/JDt9

 

Credit @AznBlusuazn

  • Like 1
Link to comment
Share on other sites

6 hours ago, squaredcirclefan said:

Hi, The reason is you have set the commentary name under Announcer settings for both characters to the same ID in Data editor. You will need to export the pofo and moveset for both characters into data editor, and change the commentary id for each to the character pac id. Reinject back into your game.

One other way of fixing the Warlord issue without deleting your save is to backup your pofo and moveset files using WWE 2k18 +. Look in the backup folder where all the pofo files are extracted and you will see the pofo files for all in-game characters and mods. if you scroll through, you will see the pofo file for the invalid warlord entry . You can note its ID, which you will need when uninstalling through CCT.

Thank you this worked for Hass & Benjamin also Hughes & Hayabusa all in the same match. 

Now I am going to check on your other suggestion about the backup folder.

31 minutes ago, matt2282p said:

@drwho269

Vanilla Game File

Here are the vanilla game files for each respective game: if you need another default character in the future.   

WWE 2K18 (PC): http://zipansion.com/LJf2
WWE 2K17 (PC): http://zipansion.com/JBAb
WWE 2K17 (XBOX 360): http://zipansion.com/JBW5
WWE 2K16 (PC): http://zipansion.com/JBZD
WWE 2K16 (XBOX 360): http://zipansion.com/JBix
WWE 2K15 (PC): http://zipansion.com/JBvX
WWE 2K15 (XBOX 360): http://zipansion.com/JBzZ
WWE 2K14 (XBOX 360): http://zipansion.com/JC3h
WWE 13 (XBOX 360): http://zipansion.com/JC6D
WWE 12 (XBOX 360): http://zipansion.com/JC9O
WWE SVR 2011 (XBOX 360): http://zipansion.com/JCEx
WWE Legends Of WM (XBOX 360): http://zipansion.com/JCK1
WWE SVR 2010 (XBOX 360): http://zipansion.com/JCLf
WWE SVR 2009 (XBOX 360): http://zipansion.com/JCPP
WWE SVR 2008 (XBOX 360): http://zipansion.com/JChz
WWE SVR 2007 (XBOX 360): http://zipansion.com/JCuh
WWE SVR 2006 (PS2): http://zipansion.com/JE8j
WWE SD! HCTP (PS2): http://zipansion.com/JEMA
TNA Impact (Models Only) (XBOX 360): http://zipansion.com/JDhA
Wrestle Kingdom (Model Only) (XBOX 360): http://zipansion.com/JDt9

 

Credit @AznBlusuazn

How do I use this?

Will this all work on PC?

Link to comment
Share on other sites

They're just default game files.   If you lose a character click the link for the game and you can download whatever file you lost.   

  • Like 1
Link to comment
Share on other sites

6 hours ago, squaredcirclefan said:

Hi, The reason is you have set the commentary name under Announcer settings for both characters to the same ID in Data editor. You will need to export the pofo and moveset for both characters into data editor, and change the commentary id for each to the character pac id. Reinject back into your game.

One other way of fixing the Warlord issue without deleting your save is to backup your pofo and moveset files using WWE 2k18 +. Look in the backup folder where all the pofo files are extracted and you will see the pofo files for all in-game characters and mods. if you scroll through, you will see the pofo file for the invalid warlord entry . You can note its ID, which you will need when uninstalling through CCT.

I have is a ALL_Slots Pofo file but I can't open it.

Search a bit more and found this:

pofo.png

Look on CCT and there is no reference to 66_, then I open this Pofo file and it refers to David Von Erich 990.

So I look on CCT and found slot 990 EMPTY but I uninstalled anyway.

After saving, exit game, rebuilt def................................. Nothing, second Warlord is still there. 

Link to comment
Share on other sites

1 hour ago, drwho269 said:

I have is a ALL_Slots Pofo file but I can't open it.

Search a bit more and found this:

pofo.png

Look on CCT and there is no reference to 66_, then I open this Pofo file and it refers to David Von Erich 990.

So I look on CCT and found slot 990 EMPTY but I uninstalled anyway.

After saving, exit game, rebuilt def................................. Nothing, second Warlord is still there. 

Did you uninstall 944 and 934 ? There is an error somewhere since 66 is for caw models. Depending on the models you have installed, I will suggest you delete your save and reinstall the pofo and moveset files for your mods. Deleting the save will get rid of the invalid entry. No need to validate any files through steam

Edited by squaredcirclefan
Link to comment
Share on other sites

5 minutes ago, squaredcirclefan said:

Did you uninstall 944 and 934 ?

YES!

How did I missed that!

I checked and uninstall 944 and woila! 

 

I guess is true, 4 eyes can see more 2.

LOL

Seriously I missed this big time.

Pretty sure I have to fix other names.... 

I removed some that were on the MOD directory or in the CH directory that were not working to make things easier.

Now I need to start with those..... one by one. 

 

Link to comment
Share on other sites

1 minute ago, drwho269 said:

YES!

How did I missed that!

I checked and uninstall 944 and woila! 

 

I guess is true, 4 eyes can see more 2.

LOL

Seriously I missed this big time.

Pretty sure I have to fix other names.... 

I removed some that were on the MOD directory or in the CH directory that were not working to make things easier.

Now I need to start with those..... one by one. 

 

Good news that's been sorted. 

Link to comment
Share on other sites

Another one!

 

Layla 811 I set a match (whatever type) but she never comes out!

The game doesn't crash though, I have to turn off the game because whoever is in the ring.... waiting.... waiting.... (you get the point) I got tired too.

what could cause this?

Link to comment
Share on other sites

2 hours ago, drwho269 said:

Another one!

 

Layla 811 I set a match (whatever type) but she never comes out!

The game doesn't crash though, I have to turn off the game because whoever is in the ring.... waiting.... waiting.... (you get the point) I got tired too.

what could cause this?

Hi,

This is an probably caused by an incorrect ID in the entrance file. Can I ask what is the ID of the entrance file you are using ? I believe you are using Layla's 2k16 entrance evt file.

Link to comment
Share on other sites

1 hour ago, squaredcirclefan said:

Hi,

This is an probably caused by an incorrect ID in the entrance file. Can I ask what is the ID of the entrance file you are using ? I believe you are using Layla's 2k16 entrance evt file.

I don't know the file, but you are correct her CH files says 2k16,  so it must be.

Link to comment
Share on other sites

It will be 00228.pac since that's the ID listed for Layla's entrance mod in Data Editor 2k18, which is also the ID for the 2k17 mod. What you also will need to do is export her moveset file using CCT and check the entrance ID assigned is correct.

10 minutes ago, drwho269 said:

I don't know the file, but you are correct her CH files says 2k16,  so it must be.

It will be 00228.pac since that's the ID listed for Layla's entrance mod in Data Editor 2k18, which is also the ID for the 2k17 mod. What you also will need to do is export her moveset file using CCT and check the entrance ID assigned is correct.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.