Need help with modded attires, some showing up but others won't

[Ori]

So I've tried getting a Seth Rollins 5 Pack Attire mod to work. Some of the issues are that his Summerslam 16 attire shows up in the entrance but changes into his Shield attire from the same mod pack once he gets into the ring. In addition, I downloaded a separate Wrestlemania 33 attire for Seth that I can get to work, but is in the wrong attire slot. The .pac file suggests it would be the 2nd attire but only shows up when I select the 3rd attire.

Any help? Advice on what I'm doing wrong?

[LordJustice17]

Pac Naming

ex: ch000XXXYZ

XXX = slot number
Y = attire number (0 is slot 1, therefore 2 would be slot 3)
Z = ring or entrance attire (2 is ring attire, 4 is entrance attire, if there is not 4 file then the ring attire is used for both ring and entrance)

- It sounds like for your first issue you replaced the Y4 file,(entrance) but not the corresponding Y2 file (ring).
- For your second issue, I assume you looked that the pacs and assumed that 22 and 24 meant it was attire 2. These are actually attire 3 because the numbering starts with 0.