RVD entrance has no trons.

[UTKR]

I have ported RVDs entrance from 2k15 to 2k17 and the motion works fine but the titantron, minitron and walltron don't play. I have editted his moveset file in the Data Editor by Cave Waverider and injected it using CCT. I also replaced the trons which I selected in the Data Editor while editing moveset file. 

 

Is there any fix or the entrance works that way?

[Ahmed Anter]

Have you downloaded/ported his titantron, minitron or walltron

if not you have to download them to make them appear

[UTKR]

On Friday, April 14, 2017 at 1:49 AM, Ahmed Anter said:

Have you downloaded/RVD'sd his titantron, minitron or walltron

if not you have to download them to make them appear 

Yes. I have downloaded them and replaced them. I have also assigned them to RVD's entrance in the Data Editor and injected it using CCT.

Everything works fine except for the trons. Don't know why. They work in other mods though. Any way to sort it out?

[4 Life]

IME, ported entrances can have issues with themes and trons when placed in certain slots. Try a few different slots and see what happens.

[UTKR]

7 hours ago, 4 Life said:

IME, ported entrances can have issues with themes and trons when placed in certain slots. Try a few different slots and see what happens.

Well... I tried with 5 different slots but still doesn't works. 

[UTKR]

14 hours ago, 4 Life said:

IME, ported entrances can have issues withglimes and trons when placed in certain slots. Try a few different slots and see what happens

Also the trons work if I don't use the RVD motion. Is this caused by faulty evt file?

[Ahmed Anter]

I think @4 Life meant that you try to change the entrance slot. If you open the RVD entrance file you'll find which slot is it in so try any slot else and see 

Edited April 17, 2017 by Ahmed Anter

[WhereTheFdidTheEgo]

@UTKR

I think I have RVDs /evt .pac file set to slot 504(00504.pac), try to rename it to that, then open it with HxD, scroll down until you see THIS, click to the left of each one of the numbers and overwrite it to be 504(never backspace/delete in HxD), then save it, put it in your /evt folder and then set his entrance to slot 504 within Data Editor.

If that doesn't work, it might be your evt file, try using the one that I linked to on my page

Edited April 17, 2017 by WhereTheFdidTheEgo

[UTKR]

22 hours ago, WhereTheFdidTheEgo said:

@UTKR

I think I have RVDs /evt .pac file set to slot 504(00504.pac), try to rename it to that, then open it with HxD, scroll down until you see THIS, click to the left of each one of the numbers and overwrite it to be 504(never backspace/delete in HxD), then save it, put it in your /evt folder and then set his entrance to slot 504 within Data Editor.

If that doesn't work, it might be your evt file, try using the one that I linked to on my page

I tried everything but it doesn't works. I don't think that it is going to work.

Edited April 18, 2017 by UTKR
type error

[iamtheVP]

Did any of you sort this out? 

I'm having similar issues... 

[UTKR]

On Saturday, May 27, 2017 at 4:25 PM, iamtheVP said:

Did any of you sort this out? 

I'm having similar issues... 

No, still not fixed. Please tell me also if you manage to fix it.

[AznBlusuazn]

On 5/29/2017 at 2:34 PM, UTKR said:

No, still not fixed. Please tell me also if you manage to fix it.

Can you upload the pofo you are using.  I'll see if I can fix it for you.  Also which Titiantron or theme are you using (year)?

[iamtheVP]

Basically all the files from this video: 

 

Also tried different pofo & moveset combinations (from WhereTheFdidTheEgo and from Lyncaz, too). I replaced Santino Marella's entrance file with the one provided by Bannockburn from the link in the video.

 

[AznBlusuazn]

Ok what slot number does the pofo need to be ?  Is there a specific one that needs to be used or the one in the package?

[iamtheVP]

Not sure about the slot. I tried different ones (e.g. 471 and also 116 pac plus slot) and did not find a solution unfortunately....

[AznBlusuazn]

Ok. What I'm asking is what slot do you want to use.  I can rebuild it for you so it can work. 

Edited June 3, 2017 by AznBlusuazn

[iamtheVP]

All right, didn't get it 

I'd go for the pac plus slot, 116. Cheers!

[AznBlusuazn]

25 minutes ago, iamtheVP said:

All right, didn't get it 

I'd go for the pac plus slot, 116. Cheers!

Okay, as a backup, can you provide a non-pac plus slot?

[iamtheVP]

6 minutes ago, AznBlusuazn said:

Okay, as a backup, can you provide a non-pac plus slot?

Well, let's say 460 or 463?

[AznBlusuazn]

Tested and working on my end.  

@iamtheVP @UTKR

Here you go:

TITANTRON Files (install to movies\titantron\)

• ENT_0116_0_0.bk2 - RVD's 2K15 Titantron #2

EVT Files (install to pac\evt\)

• 00116.pac - RVD 2K15 Entrance Animation (glitchy in 2K17)
• 06116.pac - RVD 2K15 Victory Animation (glitchy in 2K17)

MUSIC Files (inject via Sound Editor 2017 - inject over "Hardcore 2")

• OneOfaKind-Hardcore2.wem - RVD "One Of A Kind" WWE Theme

MOVESET/POFO (inject with CCT)

•  [00_RVDEntrance_MS+POFO]  (Uses 2K15 RVD Entrance - Glitchy in 2K17)
   Slot - 116.moveset + Slot - 116.pofo - Use this if using WWE 2K17+ Pac Plus
   Slot - 472.moveset + Slot - 472.pofo - Use this if not using WWE 2K17+ Pac Plus

•  [01_AltEntrance_MS+POFO]  (Uses "Tyson Kidd 2" Entrance)
   Slot - 116.moveset + Slot - 116.pofo - Use this if using WWE 2K17+ Pac Plus
   Slot - 472.moveset + Slot - 472.pofo - Use this if not using WWE 2K17+ Pac Plus

Download Link:

 

http://pintient.com/2hRt

Enjoy - Donations accepted.  

Edited June 4, 2017 by AznBlusuazn

[AznBlusuazn]

I added an alternative entrance (Tyson Kidd 2) as RVD's 2K15 entrance doesn't work in some arenas.  Download Link above has been updated.

[iamtheVP]

I am unfortunately still having "the curtain issue"... His entrance works, but the music and tron does not. And vice versa - music and tron play only with different entrance. I assume there must be a conflict of some sort, but I have no idea where to start....

Any recommendations? 

[jakeypearce]

It's because of the EVP. You need to decompress the EVP, then change the bytes at 0x20 - 0x21 to a different number, such as 01 F8 (504 in hex). Save, then compress the EVP using PacEditor.

[AznBlusuazn]

1 hour ago, iamtheVP said:

I am unfortunately still having "the curtain issue"... His entrance works, but the music and tron does not. And vice versa - music and tron play only with different entrance. I assume there must be a conflict of some sort, but I have no idea where to start....

Any recommendations? 

Strange.  In my testing I had to remove the mini and wall trons to get the titantron and music to work.  Are you adding them back?

[iamtheVP]

2 minutes ago, AznBlusuazn said:

Strange.  In my testing I had to remove the mini and wall trons to get the titantron and music to work.  Are you adding them back?

Nope, injected the .moveset without these.