WWE 2K17: Goldberg's Full Ring Entrance - Video

[Dennis-Bieser]

Damn, that is really nice

 

http://www.ign.com/videos/2016/08/23/wwe-2k17-goldbergs-full-ring-entrance

 

@hovathagod32

hopefully you will make this ring mat for 2K16 Mods

 

[The Nomodder]

Looks damn impressive!!

 

The itch is getting stronger...

[Robbie686]

SICK!!! Nitro arena FINALLY!!!

[Sunny]

 

[tekken57]

That Nitro arena is awesome but there is a lot I would change on the Goldberg model. The goatee for one is inaccurate for his wcw run, he always had some grey in it. His build seems correct but the animations on the model look wierd. Anyways, nothing a few days of modding can't change:

 

 

Edited August 23, 2016 by tekken57

[hovathagod32]

Damn, that is really nice

 

http://www.ign.com/videos/2016/08/23/wwe-2k17-goldbergs-full-ring-entrance

 

@hovathagod32

hopefully you will make this ring mat for 2K16 Mods

 

yeah.. and I'm working on having my stage look similar to that as well. That's not a bad looking Nitro, though.. My gripe is how big the ramp is. WCW didn't have long ramps like that. The floor mats and banners look exactly like my stuff from the CAA on the consoles lol (XBOX One) 

(Old WIP) 

2K17 will definitely be my real WCW project if I'm not able to finish for 2K16.

 

I can create a Nitro similar to that in 2K16. I just wish I had the lighting 2K17 has for the stage. I'd add a 3rd banner to the right side and the mini Nitro screen. As far as the ring there will be that plan mat version as well as the mat logo one, 1999, & 2000's blue mat. I previewed the blue mat in my thread but that was very early WIP. I've added my banners and everything so it's very close to 2K17's version, from my last preview I did of Nitro in my thread.. BIG difference (to me) that's more accurate for WCW.... I'm getting rid of the braided rope look to the ring ropes, and I want to add shine to the turnbuckles. WCW turnbuckles were squared, can't really change that, but there was a lot of shine to them. So I plan on fixing that for all my WCW arenas in the project. 

Edited August 23, 2016 by hovathagod32

[4 Life]

At last, an official Nitro arena Ramp sucks though.

Edited August 23, 2016 by 4 Life

[4 Life]

That Nitro arena is awesome but there is a lot I would change on the Goldberg model. The goatee for one is inaccurate for his wcw run, he always had some grey in it. His build seems correct but the animations on the model look wierd. Anyways, nothing a few days of modding can't change:

 

 

Yeah, he always had big traps but those are ridiculous and his clavicles are way too wide.

[WolfgangJT]

That Nitro arena is awesome but there is a lot I would change on the Goldberg model. The goatee for one is inaccurate for his wcw run, he always had some grey in it. His build seems correct but the animations on the model look wierd. Anyways, nothing a few days of modding can't change:

 

 

Yeah, he always had big traps but those are ridiculous and his clavicles are way too wide.

Gotta disagree...looks dead on.  His traps are that big (you can even see it matches how the left one looks in your reference).  I do agree though that they put the WWE goatee on the WCW attire.  WCW, he had grey in his beard, WWE, he dyed it.

http://i37.photobucket.com/albums/e67/ChrisMWaters/GoldbergWCW.png

 

WCW goatee look:

http://img6.bdbphotos.com/images/orig/j/p/jpukj0s6dr8vpjkr.jpg?djet1p5k

 

WWE Goatee look:

 

 

Edited August 23, 2016 by WolfgangJT

[4 Life]

Gotta disagree...looks dead on.  His traps are that big (you can even see it matches how the left one looks in your reference).  I do agree though that they put the WWE goatee on the WCW attire.  WCW, he had grey in his beard, WWE, he dyed it.

Totally unrelated and off-topic, but I've had your WCW CAW save for SvR 2006 on my PS2 memory card for 10 years, still one of my favourite pieces of community work in wrestling gaming history

[tomwearsglasses]

Damn, that is really nice

 

http://www.ign.com/videos/2016/08/23/wwe-2k17-goldbergs-full-ring-entrance

 

@hovathagod32

hopefully you will make this ring mat for 2K16 Mods

 

yeah.. and I'm working on having my stage look similar to that as well. That's not a bad looking Nitro, though.. My gripe is how big the ramp is. WCW didn't have long ramps like that. The floor mats and banners look exactly like my stuff from the CAA on the consoles lol (XBOX One) 

(Old WIP) 

2K17 will definitely be my real WCW project if I'm not able to finish for 2K16.

 

I can create a Nitro similar to that in 2K16. I just wish I had the lighting 2K17 has for the stage. I'd add a 3rd banner to the right side and the mini Nitro screen. As far as the ring there will be that plan mat version as well as the mat logo one, 1999, & 2000's blue mat. I previewed the blue mat in my thread but that was very early WIP. I've added my banners and everything so it's very close to 2K17's version, from my last preview I did of Nitro in my thread.. BIG difference (to me) that's more accurate for WCW.... I'm getting rid of the braided rope look to the ring ropes, and I want to add shine to the turnbuckles. WCW turnbuckles were squared, can't really change that, but there was a lot of shine to them. So I plan on fixing that for all my WCW arenas in the project. 

I can't wait to take the WWE(F) New Generation logo off this set as soon as this game comes out.

 

Also just throwing this out there for now - but if this year's mods port nicely then I have every intention of making 2K17 the greatest WCW game of this century.  I'd say of all time, but, you know, in '98 Revenge happened.

[jitz]

Guys, the ring is the wrong size for a WCW ring, and you're worried about a ramp. This is a WCW paint job on the WWE 2K framework. They're not going to adjust ramps and stuff for one arena, they'd have to reanimate every entrance.

[Brick]

Not just every entrance but every animation that involves the ring

[hovathagod32]

Damn, that is really nice

 

http://www.ign.com/videos/2016/08/23/wwe-2k17-goldbergs-full-ring-entrance

 

@hovathagod32

hopefully you will make this ring mat for 2K16 Mods

 

yeah.. and I'm working on having my stage look similar to that as well. That's not a bad looking Nitro, though.. My gripe is how big the ramp is. WCW didn't have long ramps like that. The floor mats and banners look exactly like my stuff from the CAA on the consoles lol (XBOX One) 

Hidden Content

2K17 will definitely be my real WCW project if I'm not able to finish for 2K16.

 

I can create a Nitro similar to that in 2K16. I just wish I had the lighting 2K17 has for the stage. I'd add a 3rd banner to the right side and the mini Nitro screen. As far as the ring there will be that plan mat version as well as the mat logo one, 1999, & 2000's blue mat. I previewed the blue mat in my thread but that was very early WIP. I've added my banners and everything so it's very close to 2K17's version, from my last preview I did of Nitro in my thread.. BIG difference (to me) that's more accurate for WCW.... I'm getting rid of the braided rope look to the ring ropes, and I want to add shine to the turnbuckles. WCW turnbuckles were squared, can't really change that, but there was a lot of shine to them. So I plan on fixing that for all my WCW arenas in the project. 

I can't wait to take the WWE(F) New Generation logo off this set as soon as this game comes out.

 

Also just throwing this out there for now - but if this year's mods port nicely then I have every intention of making 2K17 the greatest WCW game of this century.  I'd say of all time, but, you know, in '98 Revenge happened.

Listen, if I can finish what I'm working on, along with all the work that people like Lordjustice and all the character modders have done, WCW/nWo 2K17 can be a real thing for sure. That's if the overall 2K17 game is good. Otherwise, it'll just be more time spent modding than playing lol. 

Guys, the ring is the wrong size for a WCW ring, and you're worried about a ramp. This is a WCW paint job on the WWE 2K framework. They're not going to adjust ramps and stuff for one arena, they'd have to reanimate every entrance.

Yeah, that's true as well, but I've thought about the ramp thing for 2K16, actually. making a small ramp on an arena where the entrance architecture is flat... Put the Nitro stage farther back enough to when the camera cuts to the wrestler walking out, it's like they're just getting off the ramp... Kinda Like the Wrestlemania XIV Arena that has the circular opening and the small ramp. They don't show wrestlers coming out of the circular opening. Nitro could be done similar to that. I'm not sure if it would work and all the objects would properly show up, but if it could, you could actually do certain things like curve the stage or put it at an angle the way it normally was in WCW compared to the entry way.

 

It'd take some work, but I'll try on 2K16 when I'm near the end of my WCW arena project

 

 

[jbl328]

I have no significant issues with the Goldberg model. He is fit, handsome & sexy as he is in real life.

[Sunny]

I have no significant issues with the Goldberg model. He is fit, handsome & sexy as he is in real life.

http://www.youtube.com/watch?v=-ZNOrKud4s0&t=0m6s

 

[seanironmaiden]

I hope they've fixed the length of the entrance ramps for Wrestlemania sized stadiums. I don't think it should be an impossibility because of entrance animations either. With camera cuts it should be doable with the wrestler "teleporting" a bit further down the ramp to synch up with the stage / ramp / ring portions of the entrance

[the King Lives]

I hope they've fixed the length of the entrance ramps for Wrestlemania sized stadiums. I don't think it should be an impossibility because of entrance animations either. With camera cuts it should be doable with the wrestler "teleporting" a bit further down the ramp to synch up with the stage / ramp / ring portions of the entrance

if it means removing entrances again i'd rather they stay how they are

Damn, that is really nice

 

http://www.ign.com/videos/2016/08/23/wwe-2k17-goldbergs-full-ring-entrance

 

@hovathagod32

hopefully you will make this ring mat for 2K16 Mods

 

yeah.. and I'm working on having my stage look similar to that as well. That's not a bad looking Nitro, though.. My gripe is how big the ramp is. WCW didn't have long ramps like that. The floor mats and banners look exactly like my stuff from the CAA on the consoles lol (XBOX One) 

Hidden Content

2K17 will definitely be my real WCW project if I'm not able to finish for 2K16.

 

I can create a Nitro similar to that in 2K16. I just wish I had the lighting 2K17 has for the stage. I'd add a 3rd banner to the right side and the mini Nitro screen. As far as the ring there will be that plan mat version as well as the mat logo one, 1999, & 2000's blue mat. I previewed the blue mat in my thread but that was very early WIP. I've added my banners and everything so it's very close to 2K17's version, from my last preview I did of Nitro in my thread.. BIG difference (to me) that's more accurate for WCW.... I'm getting rid of the braided rope look to the ring ropes, and I want to add shine to the turnbuckles. WCW turnbuckles were squared, can't really change that, but there was a lot of shine to them. So I plan on fixing that for all my WCW arenas in the project. 

I can't wait to take the WWE(F) New Generation logo off this set as soon as this game comes out.

 

Also just throwing this out there for now - but if this year's mods port nicely then I have every intention of making 2K17 the greatest WCW game of this century.  I'd say of all time, but, you know, in '98 Revenge happened.

Listen, if I can finish what I'm working on, along with all the work that people like Lordjustice and all the character modders have done, WCW/nWo 2K17 can be a real thing for sure. That's if the overall 2K17 game is good. Otherwise, it'll just be more time spent modding than playing lol. 

Guys, the ring is the wrong size for a WCW ring, and you're worried about a ramp. This is a WCW paint job on the WWE 2K framework. They're not going to adjust ramps and stuff for one arena, they'd have to reanimate every entrance.

Yeah, that's true as well, but I've thought about the ramp thing for 2K16, actually. making a small ramp on an arena where the entrance architecture is flat... Put the Nitro stage farther back enough to when the camera cuts to the wrestler walking out, it's like they're just getting off the ramp... Kinda Like the Wrestlemania XIV Arena that has the circular opening and the small ramp. They don't show wrestlers coming out of the circular opening. Nitro could be done similar to that. I'm not sure if it would work and all the objects would properly show up, but if it could, you could actually do certain things like curve the stage or put it at an angle the way it normally was in WCW compared to the entry way.

 

It'd take some work, but I'll try on 2K16 when I'm near the end of my WCW arena project

 

 

i'm actually cool with it. i mean it's not perfect but it's also not that svr11/wwe12 crap thq gave us lol

[hovathagod32]

I hope they've fixed the length of the entrance ramps for Wrestlemania sized stadiums. I don't think it should be an impossibility because of entrance animations either. With camera cuts it should be doable with the wrestler "teleporting" a bit further down the ramp to synch up with the stage / ramp / ring portions of the entrance

if it means removing entrances again i'd rather they stay how they are

Damn, that is really nice

 

http://www.ign.com/videos/2016/08/23/wwe-2k17-goldbergs-full-ring-entrance

 

@hovathagod32

hopefully you will make this ring mat for 2K16 Mods

 

yeah.. and I'm working on having my stage look similar to that as well. That's not a bad looking Nitro, though.. My gripe is how big the ramp is. WCW didn't have long ramps like that. The floor mats and banners look exactly like my stuff from the CAA on the consoles lol (XBOX One) 

Hidden Content

2K17 will definitely be my real WCW project if I'm not able to finish for 2K16.

 

I can create a Nitro similar to that in 2K16. I just wish I had the lighting 2K17 has for the stage. I'd add a 3rd banner to the right side and the mini Nitro screen. As far as the ring there will be that plan mat version as well as the mat logo one, 1999, & 2000's blue mat. I previewed the blue mat in my thread but that was very early WIP. I've added my banners and everything so it's very close to 2K17's version, from my last preview I did of Nitro in my thread.. BIG difference (to me) that's more accurate for WCW.... I'm getting rid of the braided rope look to the ring ropes, and I want to add shine to the turnbuckles. WCW turnbuckles were squared, can't really change that, but there was a lot of shine to them. So I plan on fixing that for all my WCW arenas in the project. 

I can't wait to take the WWE(F) New Generation logo off this set as soon as this game comes out.

 

Also just throwing this out there for now - but if this year's mods port nicely then I have every intention of making 2K17 the greatest WCW game of this century.  I'd say of all time, but, you know, in '98 Revenge happened.

Listen, if I can finish what I'm working on, along with all the work that people like Lordjustice and all the character modders have done, WCW/nWo 2K17 can be a real thing for sure. That's if the overall 2K17 game is good. Otherwise, it'll just be more time spent modding than playing lol. 

Guys, the ring is the wrong size for a WCW ring, and you're worried about a ramp. This is a WCW paint job on the WWE 2K framework. They're not going to adjust ramps and stuff for one arena, they'd have to reanimate every entrance.

Yeah, that's true as well, but I've thought about the ramp thing for 2K16, actually. making a small ramp on an arena where the entrance architecture is flat... Put the Nitro stage farther back enough to when the camera cuts to the wrestler walking out, it's like they're just getting off the ramp... Kinda Like the Wrestlemania XIV Arena that has the circular opening and the small ramp. They don't show wrestlers coming out of the circular opening. Nitro could be done similar to that. I'm not sure if it would work and all the objects would properly show up, but if it could, you could actually do certain things like curve the stage or put it at an angle the way it normally was in WCW compared to the entry way.

 

It'd take some work, but I'll try on 2K16 when I'm near the end of my WCW arena project

 

 

i'm actually cool with it. i mean it's not perfect but it's also not that svr11/wwe12 crap thq gave us lol

Yeah, that's true. I hope the stage lighting works better, though. It doesn't look like it'll be colorful in between the truss's like Nitro usually is.  I'll still be modding it to create different versions. Old TNT banners, new TNT banners, WCW Monday Nitro ring mat.. I just won't be able to add TNT to the stage. It'll be a lot easier to mod a nWo Nitro with a stage like that as well, which would look a lot better than my attempt on consoles, so I'm pretty hyped for that.

 

I'm guessing this is the Nitro vs Hall for the US belt July 98.. They'll probably skip Hogan's part lol. My favorite part of their design is that they didn't add the big ass tron like they did in the older games lol

[the King Lives]

 

 

 

i'm actually cool with it. i mean it's not perfect but it's also not that svr11/wwe12 crap thq gave us lol

 

Yeah, that's true. I hope the stage lighting works better, though. It doesn't look like it'll be colorful in between the truss's like Nitro usually is.  I'll still be modding it to create different versions. Old TNT banners, new TNT banners, WCW Monday Nitro ring mat.. I just won't be able to add TNT to the stage. It'll be a lot easier to mod a nWo Nitro with a stage like that as well, which would look a lot better than my attempt on consoles, so I'm pretty hyped for that.

 

I'm guessing this is the Nitro vs Hall for the US belt July 98.. They'll probably skip Hogan's part lol. My favorite part of their design is that they didn't add the big ass tron like they did in the older games lol

yeah i hated that. wait was the hall/goldberg match for the US title? i was at that nitro (the one where if goldberg won he went after hogan's belt) but i don't even remember it being for the us title lol.

but yeah it was like THQ just threw together a few nitro designs and hybrided it with the (at the time) current hd raw set and called it a day lol

[WarGreymon77]

I guess I'm the only one who hates this Nitro arena.  The colored lights |---| on the stage (purple on SvR 2011) are completely switched off.  They used the WWF New Generation on-screen graphic instead of the transparent Nitro logo.  And the worst part of all, a striped shirt referee.  How did they have blue shirt refs in 2K16 and just forget to use one in the Monday Nitro arena?  It's already created!  What kind of logic is that?  Does not compute.  Half-assed.  Did 2K even watch WCW?  This arena was the draw for me, but now it's a big buzz kill.  Depressing.  I hope it's just the beta, and they'll fix the referee before launch.  Then, I'd be fine with it.

[the King Lives]

I guess I'm the only one who hates this Nitro arena.  The colored lights |---| on the stage (purple on SvR 2011) are completely switched off.  They used the WWF New Generation on-screen graphic instead of the transparent Nitro logo.  And the worst part of all, a striped shirt referee.  How did they have blue shirt refs in 2K16 and just forget to use one in the Monday Nitro arena?  It's already created!  What kind of logic is that?  Does not compute.  Half-assed.  Did 2K even watch WCW?  This arena was the draw for me, but now it's a big buzz kill.  Depressing.  I hope it's just the beta, and they'll fix the referee before launch.  Then, I'd be fine with it.

it doesn't bother me. it's 150% better than that POS Nitro arena THQ did for SVR11 and WWE12. you can turn off the new generation graphic. like i said it is what it is but i give them an A for effort.

i get that you're a huge wcw fan. i am as well, but i'm not going to completely judge until i see it for myself. and there's still a slight chance we can edit the arena in CAA. If they were smart enough to realize we'd want to change it.  My question is this. is the arena supposed to be based off of 97 or 98? cause it kinda seems like a hybrid

Edited August 28, 2016 by Jai

[hovathagod32]

I guess I'm the only one who hates this Nitro arena.  The colored lights |---| on the stage (purple on SvR 2011) are completely switched off.  They used the WWF New Generation on-screen graphic instead of the transparent Nitro logo.  And the worst part of all, a striped shirt referee.  How did they have blue shirt refs in 2K16 and just forget to use one in the Monday Nitro arena?  It's already created!  What kind of logic is that?  Does not compute.  Half-assed.  Did 2K even watch WCW?  This arena was the draw for me, but now it's a big buzz kill.  Depressing.  I hope it's just the beta, and they'll fix the referee before launch.  Then, I'd be fine with it.

it doesn't bother me. it's 150% better than that POS Nitro arena THQ did for SVR11 and WWE12. you can turn off the new generation graphic. like i said it is what it is but i give them an A for effort.

i get that you're a huge wcw fan. i am as well, but i'm not going to completely judge until i see it for myself. and there's still a slight chance we can edit the arena in CAA. If they were smart enough to realize we'd want to change it.  My question is this. is the arena supposed to be based off of 97 or 98? cause it kinda seems like a hybrid

it's not a hybrid.. It's Summer '98, which I'm thinking is the Scott Hall & Hogan night.. That's why the banners are updated and the ring is blank. WCW didn't change that ring mat until a little later.. I think later that month or the next. There was a brief time (I was doing a lot of research during my Wolfpac Sting mod) where the ring mat would be darker like this( almost as dark as the Nitro game), but then one night they had the WCW Monday Nitro TNT logo and kept it until mid 99 or so when they rebooted with the Star stage. You can probably pin point it on the network. The only difference between the video and the game is that the ring mat isn't as dark.

https://youtu.be/KLY18_SWwkU 

 

EDIT: July '98 is when they changed the banners, but kept the ring mat blank. They added the mat logo on August 10th 98

Edited August 28, 2016 by hovathagod32

[hovathagod32]

I guess I'm the only one who hates this Nitro arena.  The colored lights |---| on the stage (purple on SvR 2011) are completely switched off.  They used the WWF New Generation on-screen graphic instead of the transparent Nitro logo.  And the worst part of all, a striped shirt referee.  How did they have blue shirt refs in 2K16 and just forget to use one in the Monday Nitro arena?  It's already created!  What kind of logic is that?  Does not compute.  Half-assed.  Did 2K even watch WCW?  This arena was the draw for me, but now it's a big buzz kill.  Depressing.  I hope it's just the beta, and they'll fix the referee before launch.  Then, I'd be fine with it.

join the PC side.. We got ya lol

[the King Lives]

I guess I'm the only one who hates this Nitro arena.  The colored lights |---| on the stage (purple on SvR 2011) are completely switched off.  They used the WWF New Generation on-screen graphic instead of the transparent Nitro logo.  And the worst part of all, a striped shirt referee.  How did they have blue shirt refs in 2K16 and just forget to use one in the Monday Nitro arena?  It's already created!  What kind of logic is that?  Does not compute.  Half-assed.  Did 2K even watch WCW?  This arena was the draw for me, but now it's a big buzz kill.  Depressing.  I hope it's just the beta, and they'll fix the referee before launch.  Then, I'd be fine with it.

it doesn't bother me. it's 150% better than that POS Nitro arena THQ did for SVR11 and WWE12. you can turn off the new generation graphic. like i said it is what it is but i give them an A for effort.

i get that you're a huge wcw fan. i am as well, but i'm not going to completely judge until i see it for myself. and there's still a slight chance we can edit the arena in CAA. If they were smart enough to realize we'd want to change it.  My question is this. is the arena supposed to be based off of 97 or 98? cause it kinda seems like a hybrid

it's not a hybrid.. It's Summer '98, which I'm thinking is the Scott Hall & Hogan night.. That's why the banners are updated and the ring is blank. WCW didn't change that ring mat until a little later.. I think later that month or the next. There was a brief time (I was doing a lot of research during my Wolfpac Sting mod) where the ring mat would be darker like this( almost as dark as the Nitro game), but then one night they had the WCW Monday Nitro TNT logo and kept it until mid 99 or so when they rebooted with the Star stage. You can probably pin point it on the network. The only difference between the video and the game is that the ring mat isn't as dark.

https://youtu.be/KLY18_SWwkU 

 

EDIT: July '98 is when they changed the banners, but kept the ring mat blank. They added the mat logo on August 10th 98

ah okay yeah i got you. yeah i wasn't exactly sure i mean i always have seen people put the nitro logo on the mat and only thought it was a 98 time when they did that but yeah. i've always wanted them to attempt the nitro 99 stage with the C opening up during entrances only cause i wanted to see Flair almost trip and threaten to fire someone if they didn't change it lol i remember them saying that flair did that or something like that when he was "in charge" but yeah. i really have no complaints over the arena. it's a huge improvement to the svr11/wwe12 ones so yeah i'm happy. sure they could have put more thought into it and if it actually ends up being a template, the possibilities can be endless!