Entrance troubles

[El Guapo]

hOW Do i PUT MODz ON MY xBOX?

 

Only joking

 

 

Seriously though, I've managed to mess up my game somehow so that certain entrances give me a dirt disc error (i.e. not a fatal error crash).

 

The weird thing is some entrances work fine in the entrance editor, but crash the game when the match is loading.

 

Has anyone else had this happen, and how can I fix it?

 

Thanks

[Mathayus]

Sometimes I got some isues like that. To fix that, I return to an arc that worked fine and reinstall the things one by one to find where is the problem.

[bugsyboy]

I get the dirty disc for Honky entrance also , i will retry later tonight

[motishow]

Did you inject the guitar into your evtobj.pac  file?

[El Guapo]

Sometimes I got some isues like that. To fix that, I return to an arc that worked fine and reinstall the things one by one to find where is the problem.

 

Unfortunately I cannot do that as it seems this has been a problem for a while but I just didn't notice it straight away (only a select few entrances seem to be affected) so my last arc backup still has the problem in it

 

 

Did you inject the guitar into your evtobj.pac  file?

 

 

I haven't injected any entrances. The only thing I can think of is I initially developed an odd problem where certain wrestlers who have a fancy nameplate on Smackdown (eg Undertaker) would give me a dirty disc when loading a match on Smackdown, or the entrance editor (because that uses the Smackdown arena).

 

So assuming it was an arc thing, I updated non wrestler all the entrance files. It din't look like that had done anything, until now I found this new problem

[Mathayus]

What I did when I got an error on the arc and I can´t fix it cause I don´t know...

And I had the issue that you can´t use a backup of your arc.

Starting with a new arc from zero.

[El Guapo]

What I did when I got an error on the arc and I can´t fix it cause I don´t know...

And I had the issue that you can´t use a backup of your arc.

Starting with a new arc from zero.

 

That sent a shiver down my spine...

[Red Rooster]

The evtmov section of your arc maybe screwed up. Try copying that section from the original arc and pasteing it over your arc. I found that Xpacker screws up the evtmov arc when you try to do "Update arc non wrestler" on it.

[XIII XHP]

What does it mean when some entrances get skipped over?

[El Guapo]

The evtmov section of your arc maybe screwed up. Try copying that section from the original arc and pasteing it over your arc. I found that Xpacker screws up the evtmov arc when you try to do "Update arc non wrestler" on it.

 

I like that option better than the start from scratch one - I'll give that a try thanks

 

What does it mean when some entrances get skipped over?

 

 

I get that sometimes as well - could be the same thing..?

[Red Rooster]

What does it mean when some entrances get skipped over?

Yeah it means the arc is not correct

[XIII XHP]

Cool, I've been wanting to fix it for a while now.  Thanks for the info guys!!!

[El Guapo]

The evtmov section of your arc maybe screwed up. Try copying that section from the original arc and pasteing it over your arc. I found that Xpacker screws up the evtmov arc when you try to do "Update arc non wrestler" on it.

 

Do all the evtmov files need the same fix, or is the problem only likely to be in the first one?

[Red Rooster]

Try replace that whole section of the arc and see if it fixes it.

[XIII XHP]

Which part of the arc is the evtmov?

[Red Rooster]

Which part of the arc is the evtmov?

Open the evtmov in Hex and then figure it out

[XIII XHP]

Ok, thanks.  I'll do that tomorrow after work & let you all know if it works so if anyone else runs into this problem, they can fix it.

[El Guapo]

 

Which part of the arc is the evtmov?

Open the evtmov in Hex and then figure it out

 

 

You can get the file names and folders by opening them up (ctrl+r) in XPacker