WWE CAW Editor, Titantron, & Arena Import v2.3.1.0 UPDATED!

[Alex™]

It would allow you to not have to redo all your morphing, adding attires, adding logos, etc.

Still it's last on my list of things to do. I'm sorry, I know it would be a tremendous help to CAW makers, but I am so busy working on these non-retail hacks, I don't have time to mess with it now. I can only handle one thing at a time any more.

Take any time you want Brien. No rush.

[Red Rooster]

Take any time you want Brien. No rush.

No!!! You must do it immediately, I need to convert my Spongebob Squarepants CAW from Here Comes the Pain into WWE13....hurry up you slack bastard!

[brienj]

No!!! You must do it immediately, I need to convert my Spongebob Squarepants CAW from Here Comes the Pain into WWE13....hurry up you slack bastard!

I know, that's something that even I want to do. Damn it!

[prboi]

I'm having trouble making trons. I select an AVI at 320 x 320 & save the .enc file but half way through encoding, it stops & gives me a prompt saying: "You must run the program in a folder that the program has the ability to create & use temp files."

[Thetutosxd]

This works on ps3?

[Red Rooster]

I'm having trouble making trons. I select an AVI at 320 x 320 & save the .enc file but half way through encoding, it stops & gives me a prompt saying: "You must run the program in a folder that the program has the ability to create & use temp files."

Are you running it from inside the rar? Sounds like you might be. Doing what the error message says is always a good start.

[Red Rooster]

This works on ps3?

No it doesnt.

[brienj]

I'm having trouble making trons. I select an AVI at 320 x 320 & save the .enc file but half way through encoding, it stops & gives me a prompt saying: "You must run the program in a folder that the program has the ability to create & use temp files."

If it gave you that error half-way through, one of two things. Either you have a corrupted, or bad AVI file, and it crapped out on encoding it in the bad part, or you have a really crappy computer that can't keep up with the program, if you didn't get that error right away. A corrupted AVI file or having a slow ass computer COULD possibly cause that error, and I just put the other error message, because it usually happens right away, and that is the reason for it.

[prboi]

If it gave you that error half-way through, one of two things. Either you have a corrupted, or bad AVI file, and it crapped out on encoding it in the bad part, or you have a really crappy computer that can't keep up with the program, if you didn't get that error right away. A corrupted AVI file or having a slow ass computer COULD possibly cause that error, and I just put the other error message, because it usually happens right away, and that is the reason for it.

It was the AVI file. I used uncompressed when rendering it & it gave me errors. Changed to a different encoding it & now it works. Thank you so much!

[brienj]

I was wondering but I doubt its possible.

With the import feature do you think it would be possible to transfer the renders on 12 caws with it? That way maybe renders will be possible, again just wondering.

No, because when or if I get the WWE12 to WWE13 CAW converter made, it will actually be creating a completely new CAW, or updating an existing default one with the old info, and you would always have to re-save the attires in the game, which would get rid of any renders that you may possibly be able to add anyway.

[bobsandbag]

Are there any issues with the Arena Importer on BrienJ's editor? I only ask because everything else works great for me, I just cannot get this part to work. I follow all the instructions as per the helpful tips as you go along (and consulting the Help guide in the editor). I use Horizon to put the Arena's into my USB, place back onto Xbox but game will always freeze upon loading main menu. I just cannot think what I am doing wrong, if I can get all the other tools to work?

[Alex™]

Are there any issues with the Arena Importer on BrienJ's editor? I only ask because everything else works great for me, I just cannot get this part to work. I follow all the instructions as per the helpful tips as you go along (and consulting the Help guide in the editor). I use Horizon to put the Arena's into my USB, place back onto Xbox but game will always freeze upon loading main menu. I just cannot think what I am doing wrong, if I can get all the other tools to work?

Edit the name of the file to Arena.........etc. any thing you want using Horizon or BrienJ's tool. It's freeze because there's no name on the file.

Edited January 19, 2013 by DancyHercules3

[bobsandbag]

Edit the name of the file to Arena.........etc. any thing you want using Horizon or BrienJ's tool. It's freeze because there's no name on the file.

So if the Arena is called WWE Raw, then name it as WWE Raw in the editor? Interesting...

[Alex™]

So if the Arena is called WWE Raw, then name it as WWE Raw in the editor? Interesting...

Yes.

[bobsandbag]

Yes.

Thanks for the speedy response! Works perfect now, thank you!

Edited January 19, 2013 by bobsandbag

[brienj]

Edit the name of the file to Arena.........etc. any thing you want using Horizon or BrienJ's tool. It's freeze because there's no name on the file.

Don't have to do that on my Xbox. It's probably a Locale issue, trying to use an arena from a different Locale, and then in that case, you would need to give it a name. This is explained in the help file that I didn't add a Locale fix for the arena importer. Plus, he must make sure to have the most recent update to the editor, as the old version had an error.

[143tashavi]

Well, first of all, if you are opening the WWE12 CAW Editor, you better get the correct and new version which is WWE Games CAW Editor. Secondly, if you made those renders to add to your WWE13 CAW, then you should probably read the readme file, the help file, or hell, even this thread, so you'll know that you wasted your time for nothing. Then lastly, if it won't open the CAS file, then you ran it through some other resigner that messed it up, so click on the Special button, then click on the Rebuilder/Resigner, open your CAS file, and have it correctly rebuilt and resigned, and then go to work.

I can't get the new version because 360haven doesn't allow me to signup. Secondly your website is temporarily down. Unless you send me a direct link of the new version, I am stuck with the old one. Earlier I ran through Modio so I am assuming maybe that messed up resigning or rehashing.

[143tashavi]

Well, first of all, if you are opening the WWE12 CAW Editor, you better get the correct and new version which is WWE Games CAW Editor. Secondly, if you made those renders to add to your WWE13 CAW, then you should probably read the readme file, the help file, or hell, even this thread, so you'll know that you wasted your time for nothing. Then lastly, if it won't open the CAS file, then you ran it through some other resigner that messed it up, so click on the Special button, then click on the Rebuilder/Resigner, open your CAS file, and have it correctly rebuilt and resigned, and then go to work.

OK I somehow managed to download WWE Games CAW Editor..........But I cannot add renders because when I click on "Import Selection Picture" it doesn't do anything. In the "Help" it says that this ONLY works for WWE 12 CAWs. So this means cannot add renders to WWE 13 CAWs. Right? Any program which can do this?

[Red Rooster]

OK I somehow managed to download WWE Games CAW Editor..........But I cannot add renders because when I click on "Import Selection Picture" it doesn't do anything. In the "Help" it says that this ONLY works for WWE 12 CAWs. So this means cannot add renders to WWE 13 CAWs. Right? Any program which can do this?

Cant be done for WWE13 unless Brien does it for you, and he's only doing it for caw creators with really good caws.

[brienj]

OK I somehow managed to download WWE Games CAW Editor..........But I cannot add renders because when I click on "Import Selection Picture" it doesn't do anything. In the "Help" it says that this ONLY works for WWE 12 CAWs. So this means cannot add renders to WWE 13 CAWs. Right? Any program which can do this?

You said before that you aren't signed up at 360 Haven, are you now signed up there? If not, it won't take long for the account you are using to be banned anyway, and plus I already answered and fucking told you it wouldn't work. Ugh!

[bobsandbag]

Don't have to do that on my Xbox. It's probably a Locale issue, trying to use an arena from a different Locale, and then in that case, you would need to give it a name. This is explained in the help file that I didn't add a Locale fix for the arena importer. Plus, he must make sure to have the most recent update to the editor, as the old version had an error.

Some Locale's were German, but all gave the same error. Naming them in Horizon fixed it though!

[TFKaz]

is there a place where I can find ps3 cas save for converting it to xbox 360?

[brienj]

Some Locale's were German, but all gave the same error. Naming them in Horizon fixed it though!

My editor doesn't mess with the name for the Arenas, other than changing the number before the name, so if the name is incorrect to begin with or is absent, as in the case of a non-English Locale, it won't work. If it was the same Locale or properly named to begin with, it would work just fine. Or in your case, you or the person who resigned their arena to remove their ID, probably had the save in Horizon BEFORE it even touched my program. If the save doesn't come directly from the game (doesn't go through any other program), it's the fault of whatever program it was in beforehand or the Locale, and not my program.

So to summarize, if you take an arena save file off your ENGLISH Xbox 360, then have it imported into an ENGLISH save, the name will be correct, always. I tested it several dozen times, from all different IDs from 0 - 50 and it worked perfectly every time.

Edited January 20, 2013 by brienj

[bobsandbag]

My editor doesn't mess with the name for the Arenas, other than changing the number before the name, so if the name is incorrect to begin with or is absent, as in the case of a non-English Locale, it won't work. If it was the same Locale or properly named to begin with, it would work just fine. Or in your case, you or the person who resigned their arena to remove their ID, probably had the save in Horizon BEFORE it even touched my program. If the save doesn't come directly from the game (doesn't go through any other program), it's the fault of whatever program it was in beforehand or the Locale, and not my program.

So to summarize, if you take an arena save file off your ENGLISH Xbox 360, then have it imported into an ENGLISH save, the name will be correct, always. I tested it several dozen times, from all different IDs from 0 - 50 and it worked perfectly every time.

Trust me, I wasn't having a go at you or your programme, it's ace. It must be the uploader of the Arena who re-named it before me. Doesn't matter now as I have got it working. Keep up the good work Brienj!

[Alex™]

My editor doesn't mess with the name for the Arenas, other than changing the number before the name, so if the name is incorrect to begin with or is absent, as in the case of a non-English Locale, it won't work. If it was the same Locale or properly named to begin with, it would work just fine. Or in your case, you or the person who resigned their arena to remove their ID, probably had the save in Horizon BEFORE it even touched my program. If the save doesn't come directly from the game (doesn't go through any other program), it's the fault of whatever program it was in beforehand or the Locale, and not my program.

So to summarize, if you take an arena save file off your ENGLISH Xbox 360, then have it imported into an ENGLISH save, the name will be correct, always. I tested it several dozen times, from all different IDs from 0 - 50 and it worked perfectly every time.

No your editor didn't remove the name, some of them was from a JTAG user or the name wasn't there the first time.