Mods problems

[Jaime]

I've converted the move mod codes a few times now and my caw freezes when I do the move i've chosen. I've made sure i've found and convert the codes right but they didn't work. Has anyone else had this problem?

[mnmpympn]

All of mine work perfectly, no problems with them, and I even got the designs n female bodies code to work now. Give me the codes that dont work, or just tell me what caw your modding along w/ the moves your modding with and I'll take a look, just dont pile em on though.

oh yeah what system do you have?

[Man of Destruction]

which move? the value posted for it might wrong or u might be trying to make an attack move a grapple move or something like that. tell me which move u used and the value for it that u have and ill get the right 1 if its wrong.

[Smartdude613]

ok here is what i think is going wrong with your moves

1. You turned the codes on and then went into create a superstar and edited the moves or previewed the moves

you need to turn the codes on then go to options and the save from there then restart and the codes should work

[Jaime]

Here are some of the codes I can't get to work:

Jacknife (sp) G2 down 14D01768 36F0D77C

flash magic 10 ground (l) right 14901668 3670D75C

Testdrive G2 up 14D01768 36F0D7CC

Angle slam 2 G right 14D01568 36F0D7EC

[qfx]

You didn't press the BCA99B83 button beneath where it says AR2 encription, try re-entering them with that button highlighted, all the text on the screen will change to blue instead of grey.

Any1 got a move value for the fameasser? i can't find it anywhere.

[Jaime]

gfx, I followed the directions word for word including the BCA99B83 button but they just won't work for me. I forgot they're for GSv3. I hope someone can help.

[qfx]

I think i see what u've done now, the codes u posted look like they're still in hex format. If u read the instructions at the begining of the mod topic it gives a very good step by step, but if u post what character u want the moves changing for and which move u want where i'll convert it for u, hope that helps.

[Jaime]

I wanted them for caw 18, thanx. I hope you have better luck than me.

[Jaime]

Oh yeah could you post the elbow drop pin 2 as a down areial thanx again

[tokidoim]

Well, I converted a couple of the codes you posted from gs3 to hex and got the right address, and 00000000 as the value. The first 8 digits of the code in hex is the address. The next 8 digits are the value. You need to put the move you want as the value for your code. Don't put the value in the hex offset box. Change the last 8 zeroes in the CODE box to 0000???? ( ???? is the listed value for the move ) THEN convert.

CAW 18 G2 down grapple is Jackknife ( HEX )

10415ECC 000013EA

THAT'S what should be in the code box when you convert.

14C01F7A 3EF8977E

is the GS2v3 code.

nosig

[Jaime]

Thanx I'll try again