Evolution Randy Orton W/Pics

[Supa #2]

BHANGRA MAN'S Evolution Randy Orton

Formula legend:C= Color, S=Shade, T=Transparency, L=Length

(Left analogue stick) ,( right anolgue stick)

Start with default model

1.)Skin 2, C(X: -91,Y: -4), S(X: 4)

2.)Face: 25, Face model: 14

Head (X:0, Y:0)

Eyebrow (X: 0, Y:0)

Eyes (X: -11, Y:-99), (X:12, Y: -37)

Nose (X: -17, Y:97), (X: -30, Y:0)

Cheek (X:-37)

Mouth (X:27, Y: -8), (X:1)

Jaw (X: -3, Y: 18), (X:27)

3.)Eyes: 1, C(X: 9, Y:6), S(X:0)

4.)Eyebrows: 1, C(X: -94, Y: -46), S(X:0)

5.)Lips: 29, C(X: 98, Y: -18), S(X: 0)

6.)Hair: 16, C(X: -96, 6), S(X: -100)

7.)Underwear : 15>207>1>C(X:44, Y: -12),S(0)

8.)Design>Letters>Face>Sign 1/7> 6 across 0 down>second smallest size> C(X: -95, Y: -18), S(0), T(32) place low on chin

9.)Accessories> Make up> Face> Part : 50, C( X: -89,Y: 0), T(75)

10.)Design>WWE>Left arm> Part : 34, biggest size , rotate twice, C(X: 4, Y: -4),S(O),T(O) place just below half way point between elbow and shoulder

11.)Design> Simple pattern >Right arm>Part 11, second smallest size, C(X: -6,Y: -15),S(O), T(X:2) Place on right arm shoulder/ bicep

12.)Design> Picture> Right arm>Part 51, second largest size, C(X: -48,Y: -28),S(X: -85),T(13) place as low as possible up to wrist on back of arm

13.)Design> Simple pattern>Right arm> Part 81,Rotate 3*, second largest size, C(X:-9,Y: 4), S(-49),T(X: 54) place just to the right of previous pattern

14.) Design> Simple pattern >Left Arm> Part 52,second largest size,C(X: 1,Y: -9),S(X: -9), T(18) place on back of left arm move all the down until touching wrists

15.)Design>WWE Pattern>Back>Part 34> second largest size,C(X:-6, Y: 9), S(X: -39), T(X: 56) place almost as high as possible on back

16.) Design>WWE Pattern>Back>Part 34> second largest size,C(X:-6, Y: 9), S(X: -39), T(X: 56) place just below previous and overlapping previous layer

17.)Design> Simple pattern>Back>Part 11>smallest size,rotate 3*, C(X:0, Y-14),S(X-5),T(50) place on left hand side of wwe pattern 34 in layer 15

18.)Design>Simple pattern> Back> Part 20,smallest size, C(X: 8, Y: -15), S(X: -19) T(X: 34) place on right hand side of layer 15

19.)Design>Simple pattern> Back> Part 11> C(X: -5, Y: -25),S(X: 0),T(0) place just below but overlapping previous layer

20.)Design>Simple pattern>Back>Part :8,smallest size, rotate 3*, C(X: 5, Y: -20),S(0), T(X: 4) Place over the top and slighty to the right of layer 16

21.)Attire>Wristbands> 1>1> C(X:22, Y: 21), S(X: -100), T(X:100), L(X: 100)

22.)Design> Simple pattern>Back>Part: 139>largest size> C(X: -58, Y: -100),S(X: -100),T(X: 100) place on butt cheeks to cover as much of the tights design in this area at the back

**SPELL ORTON Across the back of the tights

23.) to 27.)Design> Letters>Back> Alphabet , font type 1>smallest size>

SPELL "ORTON" Across the back of the tights,C (X 30, Y:50),S(X: -62), T(X: 65)

28.)Attire>Legs>Kneepads>14>1> C(X: 12,Y: -95), S(X: -84),T(X: 100)

29.)Attire>Feet>Shoes> 8>1>1> C(X: 12, Y: -95), S(0), L(X: 29)

30.) Design>Tatoo>Body> Part: 38,rotate 3*,smallest size> C(X: -56, Y: 9), S(-100),T(X: 100) place on left hand side flame on front of tights/ underwear almost low as possible on tights

31.)Design>Simple>Body> Part 31, rotate 1*, smallest size, C(X: 21, Y: 9)S(0), T(100) Place on right hand side flame on front of tights almost low as possible

** The following is up to you and the nipples look wrong on this skin but this skin is close to him so cover up nipples with the following

32.), 33.)Design>Simple>Body>Part 138,rotate 1*,smallest size, C(X: -89, Y:34), S(X: -21), T(X: -21)

*Make the new nipples using the following pattern place them lower then the original ones

34.) 35.) Design>Letters>Face>Sign 1/7> 6 across 0 down>second smallest size> C(X: 100, Y: -10), S(X:-44), T(X:100)

Figure: Form

Head (X: -29, Y: -18), (Y:4)

Neck (X: 61, Y: 50), (Y: -100)

Chest( X: 41,Y:-10),(Y: 20)

Shoulder(X: -100,Y: -34), (Y: -20)

Abdomen (X: -4,Y: -48),(Y: 37)

Arms( X: 50,Y: 13), (Y: -52)

Forearms(X: -2,Y: 1)

Hands(X: 14,Y: -25), (Y: -5)

Waist(X: -11,Y: -37)

Thigh( X: -14, Y: -23)

**Please adjust the leg length to your content at his length the leg does not bend at all but if you want a little bend adjust between -76 to -84

Legs(X: 19, Y: -20),(Y: -86)

Feet( X: -14, Y: -9), (Y: -34)

Height 6'5"

==============

Second variant attire: Red and black

Just change the settings of the following layers from above formula

7.)Underwear : 15>207>1>C(X:99, Y: -12),S(49)

*Rest the same then:

**SPELL ORTON Across the back of the tights

Layers 23.) to 27.)Design> Letters>Back> Alphabet , font type 1>smallest size>

SPELL "ORTON" Across the back of the tights,C (X 85, Y:17),S(X: 0), T(X: 100)

*Rest the same then:

31.)Design>Simple>Body> Part 31, rotate 1*, smallest size, C(X: 87, Y: 9)S(0), T(100) Place on right hand side flame on front of tights almost low as possible

*Rest the same

Edited November 14, 2003 by Supa Fly