Jump to content

How to fix kane's entrance?


erhangaming543

Recommended Posts

Hello, i have a problem. I hate Kane walk in wwe 2k17. And i wan't transfer wwe 2k18 Kane entrance to wwe 2k17. I tried this, but problems arose in the pyro.

Is it possible to transfer entrance smoothly? PLS Help.

Link to comment
Share on other sites

7 hours ago, erhangaming543 said:

Hello, i have a problem. I hate Kane walk in wwe 2k17. And i wan't transfer wwe 2k18 Kane entrance to wwe 2k17. I tried this, but problems arose in the pyro.

Is it possible to transfer entrance smoothly? PLS Help.

Hi,

What problems have you experienced with the pyro?

Did you also port over the files for the 2k18 entrance pyro or did you just transfer the entrance and effect file?

If you are porting over an entrance, you will also have to port over the pyro files and those will fit the entrance better.

  • Like 2
Link to comment
Share on other sites

5 hours ago, BlindedByTheGrace said:

Hi,

What problems have you experienced with the pyro?

Did you also port over the files for the 2k18 entrance pyro or did you just transfer the entrance and effect file?

If you are porting over an entrance, you will also have to port over the pyro files and those will fit the entrance better.

Pyro got out of the middle of the ring, and there was no sound in the pyro.

Yes, i ported pyro file.

I even ported the effect and light files.

There were no problems other than pyro.

Edited by erhangaming543
Link to comment
Share on other sites

49 minutes ago, erhangaming543 said:

Pyro got out of the middle of the ring, and there was no sound in the pyro.

Yes, i ported pyro file.

I even ported the effect and light files.

There were no problems other than pyro.

Can you confirm you ported over the following files

gmev0107.pac from the pac\gimmick folder. 

pce60107.pac from the pac\particle folder

00107.pac file from the pac\evt\effect folder.

From inspecting the data in the Kane effect files for 2k17 and 18, the pyro sound will be an issue here. 

The data which tells the game which pyro sound to play is read from the 2k18 effect file whereas 2k17 hasn't got this data as it reads this from the gmev file.

If the pyro got out in the middle of the ring, it will mean one of the files is missing or the game is reading the wrong particle file.

  • Thanks 1
Link to comment
Share on other sites

34 minutes ago, BlindedByTheGrace said:

Can you confirm you ported over the following files

gmev0107.pac from the pac\gimmick folder. 

pce60107.pac from the pac\particle folder

00107.pac file from the pac\evt\effect folder.

From inspecting the data in the Kane effect files for 2k17 and 18, the pyro sound will be an issue here. 

The data which tells the game which pyro sound to play is read from the 2k18 effect file whereas 2k17 hasn't got this data as it reads this from the gmev file.

If the pyro got out in the middle of the ring, it will mean one of the files is missing or the game is reading the wrong particle file.

I forgot to throw the pce6017.pac file, I'm sorry.

Is it possible to port only the walk to the character of kane '98?

Edited by erhangaming543
Link to comment
Share on other sites

20 minutes ago, erhangaming543 said:

I forgot to throw the pce6017.pac file, I'm sorry.

Is it possible to port only the walk to the character of kane '98?

Are you porting over Kane98’s entrance or Kane’s entrance ?

Link to comment
Share on other sites

10 minutes ago, BlindedByTheGrace said:

Are you porting over Kane98’s entrance or Kane’s entrance ?

Kane '98 walk is already the same in wwe 2k18 (I've already fixed this out.)

My game crashes when I entered the kane entrance. (it happened after I port the particle file)

Link to comment
Share on other sites

O yes I have just remembered . 2K18 pyro files (the pce60XXX file) crash in 2k17. There's some incompatibility issue. Looking at it, you will have to use the 2k17 pyro files for the entrance since the particle file will not work.

 

 

Edited by BlindedByTheGrace
Link to comment
Share on other sites

28 minutes ago, BlindedByTheGrace said:

O yes I have just remembered . 2K18 pyro files (the pce60XXX file) crash in 2k17. There's some incompatibility issue. Looking at it, you will have to use the 2k17 pyro files for the entrance since the particle file will not work.

 

 

Okey, Thank you.

(My reason for doing this, wwe 2k18 low fps in my computer.)

28 minutes ago, BlindedByTheGrace said:

O yes I have just remembered . 2K18 pyro files (the pce60XXX file) crash in 2k17. There's some incompatibility issue. Looking at it, you will have to use the 2k17 pyro files for the entrance since the particle file will not work.

 

 

I restored particle file. My game is not crashed, but again the pyro came out of the middle of the ring.

What should I do?

Edited by erhangaming543
Link to comment
Share on other sites

20 minutes ago, erhangaming543 said:

Okey, Thank you.

(My reason for doing this, wwe 2k18 low fps in my computer.)

I restored particle file. My game is not crashed, but again the pyro came out of the middle of the ring.

What should I do?

Hi,

I have tried to replicate what you have done and I am not experiencing the same issue.

Could you provide a bit more detail as to

The ID's and names of the files you have copied over from 2k18.

Link to comment
Share on other sites

1 hour ago, BlindedByTheGrace said:

Hi,

I have tried to replicate what you have done and I am not experiencing the same issue.

Could you provide a bit more detail as to

The ID's and names of the files you have copied over from 2k18.

The files I copied; pac/evt/00107.pac,   pac/evt/effect/00107.pac,   pac/gimmick/gmev0107 (that's all.)

There are no problems other than pyro. 

 

When I port the entrance, Kane walk is not changed in advanced creations. Only changes in easy creations. If it changes in advanced creations, i can set pyro easily in advanced creations.  

Edited by erhangaming543
Link to comment
Share on other sites

32 minutes ago, erhangaming543 said:

The files I copied; pac/evt/00107.pac,   pac/evt/effect/00107.pac,   pac/gimmick/gmev0107 (that's all.)

There are no problems other than pyro.   

Can you rplace the original 2k17 effect file and gmev files back  so its just the 2k18 entrance alone without the other files.

Edited by BlindedByTheGrace
Link to comment
Share on other sites

18 minutes ago, BlindedByTheGrace said:

Can you rplace the original 2k17 effect file and gmev files back  so its just the 2k18 entrance alone without the other files.

It fixed, but inside the ring the pyro comes out early and the red light goes out prematurely. Is it possible to take the pyro and red light further?

As i said, advanced creations doesn't work either.

 

Edited by erhangaming543
Link to comment
Share on other sites

9 minutes ago, erhangaming543 said:

It fixed, but inside the ring the pyro comes out early and the red light goes out prematurely. Is it possible to take the pyro and red light further?

As i said, advanced creations doesn't work either.

 

It’s possible with the lighting. I will look into the pyro. I should be able to adjust the timing . 

Link to comment
Share on other sites

2 hours ago, BlindedByTheGrace said:

It’s possible with the lighting. I will look into the pyro. I should be able to adjust the timing . 

OK, i am waiting. You worked very hard for me, thank you very much

Link to comment
Share on other sites

1 hour ago, erhangaming543 said:

OK, i am waiting. You worked very hard for me, thank you very much

Hi,

can you test these files with the ported Kane entrance whenever you have a chance?

I have modified the gimmick and effect files. i also included the 2k18 entrance file though I know youve got it.

The following has been modified to match the 2k18 entrance:

Ring Pyro timings

Light timings

Issue with one of the stage pyro's in the centre of the ring . (This is due to the pyro emitter ID's for the 2k18 entrance being slightly different from the 2k17 entrance)

 

https://mega.nz/file/YYxXmKoZ#VfZRMnMVfISJsRXMZuDXpm-u1ubm9pbGTLbEqhWbHYU

Link to comment
Share on other sites

31 minutes ago, BlindedByTheGrace said:

Hi,

can you test these files with the ported Kane entrance whenever you have a chance?

I have modified the gimmick and effect files. i also included the 2k18 entrance file though I know youve got it.

The following has been modified to match the 2k18 entrance:

Ring Pyro timings

Light timings

Issue with one of the stage pyro's in the centre of the ring . (This is due to the pyro emitter ID's for the 2k18 entrance being slightly different from the 2k17 entrance)

 

https://mega.nz/file/YYxXmKoZ#VfZRMnMVfISJsRXMZuDXpm-u1ubm9pbGTLbEqhWbHYU

It worked, but pyro is comes out early again. But not that much.

Sorry i made you so hard.

In my computer has less fps at wwe 2k18.  ;(

Thank you.

Edited by erhangaming543
  • Like 1
Link to comment
Share on other sites

5 hours ago, erhangaming543 said:

It worked, but pyro is comes out early again. But not that much.

Sorry i made you so hard.

In my computer has less fps at wwe 2k18.  ;(

Thank you.

Are you sure you copied the gimmick file in the pac\gimmick folder ? I’ll have a look again.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...