squaredcirclefan

2K20 ports for 2k19....For users still playing 2k19 - Usos 2k20, Haas and Benjamin, Lucha House Party entrance and victory, Hawkins and Ryder, Mandy and Sonya Deville, Kendrick and London , DX 2K15 TAG entrances uploaded .

Recommended Posts

squaredcirclefan
Just now, DoubleAgent74 said:

That's what I usually do.  I also assign them in Data Editor, if only because CCT tells me to.

If you have your trons and entrance setup in CAE, you just assign them in the game rather than CCT. This way , they wouldn't reset if you make any changes.

  • Like 1

Share this post


Link to post
Share on other sites
squaredcirclefan
12 minutes ago, TeamShattSean said:

The pofo and the moveset file seems fine to me. It seems most of the moves are set to the Undertakers.

One of the moveset files hasn't got the Wrestler ID set in Data Editor.

One other thing is, if you use Farooq's template pofo and moveset files from 2k16 in Data Editor, they will cause issues. 

Share this post


Link to post
Share on other sites
DoubleAgent74
26 minutes ago, squaredcirclefan said:

If you have your trons and entrance setup in CAE, you just assign them in the game rather than CCT. This way , they wouldn't reset if you make any changes.

Good call.  Would I need to rebuild the DEF after using the Item Editor?

Also, do you have a Patreon so I could throw a couple bucks your way for helping out?

Share this post


Link to post
Share on other sites
squaredcirclefan
5 minutes ago, DoubleAgent74 said:

Good call.  Would I need to rebuild the DEF after using the Item Editor?

Also, do you have a Patreon so I could throw a couple bucks your way for helping out?

Hi, No you don't . As long as you have rebuilt the def file when you added the files to your game.

Thanks for the offer . No I don't have one. Don't worry about that. 

  • Like 3

Share this post


Link to post
Share on other sites
DoubleAgent74
16 hours ago, squaredcirclefan said:

Thanks for the offer . No I don't have one. Don't worry about that. 

Well, at any rate, I do appreciate the help.  Just two more things, if you can:

1) Trying to edit Rhea Ripley's entrance in Advanced CAE with her 2K20 animation in place gets me an infinite load screen.  This isn't a deal-breaker; I was hoping to add some lighting, but I can get by without it.

2) I cannot for the life of me get AJ Lee's entrance to work.  I've tried renaming all the EVTs from 298 to 500 (her 2K19 slot #) as well as forcing the animations in with Data Editor, but no luck.  (And yes, I'm the guy who's been asking you about this on YouTube.)

Edited by DoubleAgent74
more info

Share this post


Link to post
Share on other sites
squaredcirclefan
3 minutes ago, DoubleAgent74 said:

Well, at any rate, I do appreciate the help.  Just two more things, if you can:

1) Trying to edit Rhea Ripley's entrance in Advanced CAE with her 2K20 animation in place gets me an infinite load screen.  This isn't a deal-breaker; I was hoping to add some lighting, but I can get by without it.

2) I cannot for the life of me get AJ Lee's entrance to work.  I've tried renaming all the EVTs from 298 to 500 (her 2K19 slot #) as well as forcing the animations in with Data Editor, but no luck.  (And yes, I'm the guy who's been asking you about this on YouTube.)

Hi,

1. You can't use a single entrance animation file for advanced animations. There are separate files for advance animations in the game.

      2k20 uses the same file for single and advanced entrance animations but the  2k20 game engine is designed to implement this which 2k19 isn't.

    The Rhea Ripley entrance and most of the entrances I have ported are using 2k20 data for the light effects which I copied over from 2k20 and placed in a 2k19 effects file as 2k20 doesn't have pac files for effects and lighting.

If you want a different lighting effect , I will suggest you preview the in-game 2k19 entrances and see which one has a lighting effect similar to that which you are trying to set up and use that effect file instead.

You will have to provide information on the AJ Lee entrance so I can help as I don't own the YouTube channel you are referring to. It is just a coincidence of names.

Share this post


Link to post
Share on other sites
DoubleAgent74
24 minutes ago, squaredcirclefan said:

Hi,

1. You can't use a single entrance animation file for advanced animations. There are separate files for advance animations in the game.

      2k20 uses the same file for single and advanced entrance animations but the  2k20 game engine is designed to implement this which 2k19 isn't.

    The Rhea Ripley entrance and most of the entrances I have ported are using 2k20 data for the light effects which I copied over from 2k20 and placed in a 2k19 effects file as 2k20 doesn't have pac files for effects and lighting.

If you want a different lighting effect , I will suggest you preview the in-game 2k19 entrances and see which one has a lighting effect similar to that which you are trying to set up and use that effect file instead.

You will have to provide information on the AJ Lee entrance so I can help as I don't own the YouTube channel you are referring to. It is just a coincidence of names.

Ah, OK.  It looked like the lighting was built into Rhea's entrance animation, but I still thought I'd ask. 

As for AJ: from what I can tell, the EVT files the channel owner linked me to were from 2K18.   I tried both copying the files over as-is and renaming them from 298 (her 2K18 slot, I assume) to 500 (her 2K19 slot).  I even looked up the animation number in Data Editor by opening the Entrance Motion drop box under Easy Creation Entrance Motions (01198) and tried changing the file names to match that.  Nothing.

However, I just now opened up what I think is her entrance file--\pac\evt\00298.pac--in Hex Editor, and I'm seeing at least two references to 298.  Do you think changing those to 500 would solve the problem?  Here's the PAC so you can look for yourself, if you like:

https://drive.google.com/open?id=15A6zvBjCKoLqFw8gVeAreXUH3o1mXdSh

Share this post


Link to post
Share on other sites
squaredcirclefan
23 minutes ago, DoubleAgent74 said:

Ah, OK.  It looked like the lighting was built into Rhea's entrance animation, but I still thought I'd ask. 

As for AJ: from what I can tell, the EVT files the channel owner linked me to were from 2K18.   I tried both copying the files over as-is and renaming them from 298 (her 2K18 slot, I assume) to 500 (her 2K19 slot).  I even looked up the animation number in Data Editor by opening the Entrance Motion drop box under Easy Creation Entrance Motions (01198) and tried changing the file names to match that.  Nothing.

However, I just now opened up what I think is her entrance file--\pac\evt\00298.pac--in Hex Editor, and I'm seeing at least two references to 298.  Do you think changing those to 500 would solve the problem?  Here's the PAC so you can look for yourself, if you like:

https://drive.google.com/open?id=15A6zvBjCKoLqFw8gVeAreXUH3o1mXdSh

500 is actually the ID for her mod slot not the entrance evt slot. There is an entrance file with ID 500 ( one of the generic entrances) so you can’t use that ID. The ID’s for the 2k18 and 19 entrance files can’t be changed by Just renaming those ID’s.I will have a look at the file and see the best way around it. 
The lighting for entrances isn’t built into the animation files. The effect files also contain timing information which fits the various stages of the entrance, that’s why it looks that way. You can either use bright light effects or dark ones. I think the developers used a lot of dark lighting with spotlights in 2K20,  especially for NXT Stars as it makes it look more realistic as it is in the NXT Arenas. When I ported those entrances, I tried as much as possible to use the effects data and timings for each entrance as they are in 2k20 but bright lights can be used alternatively.

Share this post


Link to post
Share on other sites
DoubleAgent74
3 minutes ago, squaredcirclefan said:

500 is actually the ID for her mod slot not the entrance evt slot. There is an entrance file with ID 500 ( one of the generic entrances) so you can’t use that ID. The ID’s for the 2k18 and 19 entrance files can’t be changed by Just renaming those ID’s.I will have a look at the file and see the best way around it. 
The lighting for entrances isn’t built into the animation files. The effect files also contain timing information which fits the various stages of the entrance, that’s why it looks that way. You can either use bright light effects or dark ones. I think the developers used a lot of dark lighting with spotlights in 2K20,  especially for NXT Stars as it makes it look more realistic as it is in the NXT Arenas. When I ported those entrances, I tried as much as possible to use the effects data and timings for each entrance as they are in 2k20 but bright lights can be used alternatively.

Nah, I think you did great with Rhea's entrance.  The more I think about, the more I want to leave it alone.

As soon as I replied to your last post, I actually opened up the main EVT files in Hex Editor (00298 and 06298) and changed the first three 298 references to 500, then copied the files over and booted the game.  I knew something was off when AJ skipped out like she was supposed to, but her Trons all went to black/default and her entrance animation was listed as "Don't Forget the Keys."

Share this post


Link to post
Share on other sites
squaredcirclefan
1 hour ago, DoubleAgent74 said:

Nah, I think you did great with Rhea's entrance.  The more I think about, the more I want to leave it alone.

As soon as I replied to your last post, I actually opened up the main EVT files in Hex Editor (00298 and 06298) and changed the first three 298 references to 500, then copied the files over and booted the game.  I knew something was off when AJ skipped out like she was supposed to, but her Trons all went to black/default and her entrance animation was listed as "Don't Forget the Keys."

As I mentioned before, the entrance listed as DONT FORGET THE KEYS uses the ID 500.

Here is a link to the AJ Lee entrance file from 2k17 with the effects and light file. I have assigned 1198 to the entrance , which is the ID assigned in Data Editor. 

Place the files in your game, rebuild the def file and assign with Data Editor.

https://mega.nz/#!hFhVRYQb!zrgI9fA_arYeDCmxKEcaWziA5giJIEGmMaxltg9EM0g

Edited by squaredcirclefan
  • Like 1

Share this post


Link to post
Share on other sites
squaredcirclefan

I have updated the moves pack. A new download link can be found in the first post.

This is a minor update.  The two main combo strike animations are in beta as not all the data for the moves is compatible with 2k19. Its a 50/50 chance the moves will work perfectly in the game, but due to requests, I decided to upload as it is. You will notice the initial strike does not connect. This is due to the additional data called homing parameters for strike moves which is formatted differently in 2k20.

1. Mia Yim Combo - Mia Yim's signature combo Strong strike (beta)

2. Palm Strike Barrage - Matt Riddle's Combo strong strike (beta)

3. Leg Caught Pele Kick (Matt Riddle)  - Matt Riddle Kick reversal move - The same move is also placed  in the kick reversal category and listed as Pele Kick Reversal.

 

  • Like 5
  • Thanks 1
  • Woo 1

Share this post


Link to post
Share on other sites
bushysowavvey

WAIT THAT'S NOT YOUR YOUTUBE??? I've always wanted to ask you but wowwww

  • Like 1

Share this post


Link to post
Share on other sites
squaredcirclefan
2 minutes ago, bushysowavvey said:

WAIT THAT'S NOT YOUR YOUTUBE??? I've always wanted to ask you but wowwww

No its not. The channel is run by  SCGamplays on this forum.

  • Like 1

Share this post


Link to post
Share on other sites
bushysowavvey
3 minutes ago, squaredcirclefan said:

No its not. The channel is run by  SCGamplays on this forum.

Wow. Are you guys friends or something? Like you post stuff and just tell him to credit you?

Share this post


Link to post
Share on other sites
squaredcirclefan
1 minute ago, bushysowavvey said:

Wow. Are you guys friends or something? Like you post stuff and just tell him to credit you?

To be honest , he just showcases the mods and credits. I don't know if he asks other modders but definitely not me.

Share this post


Link to post
Share on other sites
TeamShattSean

In have a question!!

 

i finally got faarooq by the way 

 

Has anyone ported 2k20 model of BROCK lesnar? I love his 2k20 model ! 

Share this post


Link to post
Share on other sites
DoubleAgent74
17 hours ago, squaredcirclefan said:

As I mentioned before, the entrance listed as DONT FORGET THE KEYS uses the ID 500.

Here is a link to the AJ Lee entrance file from 2k17 with the effects and light file. I have assigned 1198 to the entrance , which is the ID assigned in Data Editor. 

Place the files in your game, rebuild the def file and assign with Data Editor.

https://mega.nz/#!hFhVRYQb!zrgI9fA_arYeDCmxKEcaWziA5giJIEGmMaxltg9EM0g

This worked, with one catch: if I try to edit the entrance in CAE, the motion defaults back to the Rock's and I have to re-import the moveset in CCT.  If I just watch the entrance without editing or play a match, it works perfectly.

Edited by DoubleAgent74
more info

Share this post


Link to post
Share on other sites
cdiebold1

lol, I always thought that was your YT as well

  • Like 1

Share this post


Link to post
Share on other sites
squaredcirclefan
10 hours ago, DoubleAgent74 said:

This worked, with one catch: if I try to edit the entrance in CAE, the motion defaults back to the Rock's and I have to re-import the moveset in CCT.  If I just watch the entrance without editing or play a match, it works perfectly.

Hi,

This happens if the entrance is not listed for selection in the Create Entrance Menu. You will need to use CAE Item adder tool (You will find this in the Tools and Resources section) to add the ID and string name of the entrance to any of the cae_item.pac files in the pac\menu folder.

6 hours ago, cdiebold1 said:

lol, I always thought that was your YT as well

No it isn't. Some viewers think its mine and will make requests on the page like I own the channel. 

Edited by squaredcirclefan
  • Like 1
  • Haha 2

Share this post


Link to post
Share on other sites
DoubleAgent74
6 hours ago, squaredcirclefan said:

Hi,

This happens if the entrance is not listed for selection in the Create Entrance Menu. You will need to use CAE Item adder tool (You will find this in the Tools and Resources section) to add the ID and string name of the entrance to any of the cae_item.pac files in the pac\menu folder.

I'm not sure this worked.  The motion shows up in the CAE menu as "AJ Lee," and she skips out on stage like AJ, but it still shows up as "Don't Forget The Keys" once I select it.  Once I select it, every tron I try to pick comes up as either black or the arena movie.

 

Edited by DoubleAgent74

Share this post


Link to post
Share on other sites
squaredcirclefan
43 minutes ago, DoubleAgent74 said:

I'm not sure this worked.  The motion shows up in the CAE menu as "AJ Lee," and she skips out on stage like AJ, but it still shows up as "Don't Forget The Keys" once I select it.  Once I select it, every tron I try to pick comes up as either black or the arena movie.

 

You have probably set the evt number as 500 instead of 1198 which is the ID of the entrance file I sent you. 500 is the character slot ID and should not be confused with the entrance ID.

Edited by squaredcirclefan
  • Yes! 1

Share this post


Link to post
Share on other sites
DoubleAgent74
1 hour ago, squaredcirclefan said:

You have probably set the evt number as 500 instead of 1198 which is the ID of the entrance file I sent you. 500 is the character slot ID and should not be confused with the entrance ID.

That's exactly what I did, so I tried one more time using 1198 and it worked perfectly!

I do appreciate your help.  I have just one more question: I now have a total of four AJ Lee entries in my entrance motion list.  Is there a way I can get rid of the three that don't work?

Edited by DoubleAgent74
B.ad punc'tua"tio,n.

Share this post


Link to post
Share on other sites
squaredcirclefan

 

1 hour ago, DoubleAgent74 said:

That's exactly what I did, so I tried one more time using 1198 and it worked perfectly!

I do appreciate your help.  I have just one more question: I now have a total of four AJ Lee entries in my entrance motion list.  Is there a way I can get rid of the three that don't work?

Definitely. It has to be done manually though. Can you send me the cae_item.pac file with the entries ?

Edited by squaredcirclefan

Share this post


Link to post
Share on other sites
Lashley93

Noob here, but how do I inject into a pac file?

Share this post


Link to post
Share on other sites
squaredcirclefan
Just now, Lashley93 said:

Noob here, but how do I inject into a pac file?

What are you trying to inject into a pac file ?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.