Jump to content

How to import mini-trons to wwe 2k14 and wwe 2k15 (Sticky this) new


Twistedmisery666™

Recommended Posts

update !!!!!!!! this works for wwe 2k15 as well 

  

 you just use the evtmov_ss_mini.pac file for 2k15 to do it

 

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ok here is a better tutorial pic by pic for ppl to understand better :)  

  

 

 1 .ok 1st xdecompress the evtmov.pac

 

then quick bms you shall get these files you see in the pic

 

2ducqia.jpg

 

2ujo3zc.jpg

ok now you see the "po0f' file change it to bik2 to there is a 

minitron there and a side trons so you can rename both of them if you want to to view them

--------------------------------

 

2iw5548.jpg

 

 

 

 

 

 

 

 

 

see now i changed the other file

 

 

 

 

 

svrm9x.jpg

 

 

i right clicked the file to bring it in hd hex edit......

 

 

 

 

 

 

 

29lk3k0.jpg

 

 

now you see the evtmov.pac open that :)

 

 

 

 

 

 

 

2cylilc.jpg

 

ok now its open in hex hd as you see above so is the other file right....

 

 

 

 

wryr8k.jpg

 

as you see here i highlight this to find it in the evtmov.pac

 

 

v2rcjt.jpg

 

then it finds the correct values to replace in the evtmov.pac

 

the 143.bik2 select it copy all of its values to input them in to the evtmov.pac over the one thats there

make sure you find the correct offsets as above to find them.

 

dwp0ya.jpg

 

NOTE; make sure you rename the files you replace with the original ones like etc 143.bik2 has to be that name to replace

then save after you repace them but make sure you backup your file so encase you messup

j

Edited by Twistedmisery666™
  • Like 3
Link to comment
Share on other sites

what's your method for decompressing the evtmov.pac? when i decompress with xdecompress, i just get an error message[/quote

Are you sure your doing it correctly ?]

 

I don't think I was. I've solved it now :) All working fine 

Link to comment
Share on other sites

Open and the xdecompress evtmov.pac

2. Then extract the files with quick bmps

3. Look threw the files and rename to bik2

There in a diffrent file name there in a "m" folders

Plus a name for

4. Open the one you wanna replace in hex hd find the offsets from bottom to top then open the other one you are replacing it with copy all of the hex hd info..then paste it in the evtmov.pac

Then done thanks to jbp for telling how he did it.

Can you explain this better? So everybody can understand :)

I did the 1st passage.. Then?? What is quick bmps? :)

Edited by davideguerrero1
Link to comment
Share on other sites

 

Open and the xdecompress evtmov.pac

2. Then extract the files with quick bmps

3. Look threw the files and rename to bik2

There in a diffrent file name there in a "m" folders

Plus a name for

4. Open the one you wanna replace in hex hd find the offsets from bottom to top then open the other one you are replacing it with copy all of the hex hd info..then paste it in the evtmov.pac

Then done thanks to jbp for telling how he did it.

Can you explain this better? So everybody can understand :)

 

Yeah I dont mean to be a dick but if you are going to write a tutorial you probably should write it a bit more clearly.

 

I understand what you mean but Im sure many others wont.

Edited by Red Rooster
Link to comment
Share on other sites

Open and the xdecompress evtmov.pac

2. Then extract the files with quick bmps

3. Look threw the files and rename to bik2

There in a diffrent file name there in a "m" folders

Plus a name for

4. Open the one you wanna replace in hex hd find the offsets from bottom to top then open the other one you are replacing it with copy all of the hex hd info..then paste it in the evtmov.pac

Then done thanks to jbp for telling how he did it.

Can you explain this better? So everybody can understand :)

Yeah I dont mean to be a dick but if you are going to write a tutorial you probably should write it a bit more clearly.

I understand what you mean but Im sure many others wont. Sorry fella i was kinda sleepy when i wrote this was typing from my cell phone. Ill redo it tho

Edited by Twistedmisery666
Link to comment
Share on other sites

Is it replacing titantrons or are able to add additional trons without removing what's already there man?

 

I liked the Real Americans titantron on your channel , you should upload more man!

Link to comment
Share on other sites

 

 

Open and the xdecompress evtmov.pac

2. Then extract the files with quick bmps

3. Look threw the files and rename to bik2

There in a diffrent file name there in a "m" folders

Plus a name for

4. Open the one you wanna replace in hex hd find the offsets from bottom to top then open the other one you are replacing it with copy all of the hex hd info..then paste it in the evtmov.pac

Then done thanks to jbp for telling how he did it.

Can you explain this better? So everybody can understand :)

 

Yeah I dont mean to be a dick but if you are going to write a tutorial you probably should write it a bit more clearly.

 

I understand what you mean but Im sure many others wont.

 

Thank you ;)

Link to comment
Share on other sites

 

 

Open and the xdecompress evtmov.pac

2. Then extract the files with quick bmps

3. Look threw the files and rename to bik2

There in a diffrent file name there in a "m" folders

Plus a name for

4. Open the one you wanna replace in hex hd find the offsets from bottom to top then open the other one you are replacing it with copy all of the hex hd info..then paste it in the evtmov.pac

Then done thanks to jbp for telling how he did it.

Can you explain this better? So everybody can understand :)

 

Yeah I dont mean to be a dick but if you are going to write a tutorial you probably should write it a bit more clearly.

 

I understand what you mean but Im sure many others wont.

 

Thank you ;)

Link to comment
Share on other sites

 

 

 

Open and the xdecompress evtmov.pac

2. Then extract the files with quick bmps

3. Look threw the files and rename to bik2

There in a diffrent file name there in a "m" folders

Plus a name for

4. Open the one you wanna replace in hex hd find the offsets from bottom to top then open the other one you are replacing it with copy all of the hex hd info..then paste it in the evtmov.pac

Then done thanks to jbp for telling how he did it.

Can you explain this better? So everybody can understand :) Yeah I dont mean to be a dick but if you are going to write a tutorial you probably should write it a bit more clearly.

I understand what you mean but Im sure many others wont. Sorry fella i was kinda sleepy when i wrote this was typing from my cell phone. Ill redo it tho

 

I did the first passage, but didnt understand the other passages.. Can you explain better? :)

Link to comment
Share on other sites

 

 

 

 

Open and the xdecompress evtmov.pac

2. Then extract the files with quick bmps

3. Look threw the files and rename to bik2

There in a diffrent file name there in a "m" folders

Plus a name for

4. Open the one you wanna replace in hex hd find the offsets from bottom to top then open the other one you are replacing it with copy all of the hex hd info..then paste it in the evtmov.pac

Then done thanks to jbp for telling how he did it.

Can you explain this better? So everybody can understand :) Yeah I dont mean to be a dick but if you are going to write a tutorial you probably should write it a bit more clearly.

I understand what you mean but Im sure many others wont. Sorry fella i was kinda sleepy when i wrote this was typing from my cell phone. Ill redo it tho

 

I did the first passage, but didnt understand the other passages.. Can you explain better? :)

 

 

 

updated 1st page

Link to comment
Share on other sites

for some reason, i'm having trouble again lol i'm obviously not decompressing it right. what i'm doing is dragging xbdecompress into a command prompt. then i hit space and drag the evtmov.pac into the same command prompt. i hit space again, drag the evtmov into it again and type .decompress. 

 

then i get a message saying 'error: file was not compressed in a native form'

 

i thought i did it, but clearly i've not. any idea which step i'm missing?

Link to comment
Share on other sites

for some reason, i'm having trouble again lol i'm obviously not decompressing it right. what i'm doing is dragging xbdecompress into a command prompt. then i hit space and drag the evtmov.pac into the same command prompt. i hit space again, drag the evtmov into it again and type .decompress.

then i get a message saying 'error: file was not compressed in a native form'

i thought i did it, but clearly i've not. any idea which step i'm missing?[/

just click start

then click run

then in the run box type cmd

hit enter

now

drag xbdecompress into the black box that showed up

now add a space

now drag the file you want to decompress

now add another space

now drag that same file into the black box again and add .uncompressed

after it

hit enter

now you will have a new file thats uncompressed.

Edited by Twistedmisery666
Link to comment
Share on other sites

Would be psyched to try, but I have retail. So the game wont be really fun i guess, lol.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...